The details of an Amazon Web Services account.

Provides details about one of the following actions that affects or that was taken on a resource:

Provides information about the IP address where the scanned port is located.

For NetworkConnectionAction and PortProbeDetails, LocalPortDetails provides information about the local port that was involved in the action.

For AwsApiAction, NetworkConnectionAction, and PortProbeAction, RemoteIpDetails provides information about the remote IP address that was involved in the action.

Provides information about the remote port that was involved in an attempted network connection.

An ActionTarget object.

An adjustment to the CVSS metric.

Represents a Security Hub administrator account designated by an organization management account.

Information about an enabled security standard in which a security control is enabled.

Information about an Availability Zone.

Provided if ActionType is AWS_API_CALL. It provides details about the API call that was detected.

Provided if CallerType is domain. It provides information about the DNS domain that issued the API call.

Contains information about settings for logging access for the stage.

Contains information about settings for canary deployment in the stage.

Contains information about the endpoints for the API.

Defines settings for a method for the stage.

Contains information about a REST API in version 1 of Amazon API Gateway.

Provides information about a version 1 Amazon API Gateway stage.

Contains information about a version 2 API in Amazon API Gateway.

Contains route settings for a stage.

Contains information about a version 2 stage for Amazon API Gateway.

An Availability Zone for the automatic scaling group.

Provides details about an auto scaling group.

Details about the launch template to use.

The mixed instances policy for the automatic scaling group.

Information about the instances distribution.

Describes a launch template and overrides for a mixed instances policy.

Details about the launch template to use for a mixed instances policy.

Property values to use to override the values in the launch template.

A block device for the instance.

Parameters that are used to automatically set up EBS volumes when an instance is launched.

Details about a launch configuration.

Information about the type of monitoring for instances in the group.

The metadata options for the instances.

Provides a list of backup options for each resource type.

Provides details about an Backup backup plan and an array of BackupRule objects, each of which specifies a backup rule.

Provides details about an Backup backup plan and an array of BackupRule objects, each of which specifies a backup rule.

Provides lifecycle details for the backup plan. A lifecycle defines when a backup is transitioned to cold storage and when it expires.

An array of CopyAction objects, each of which contains details of the copy operation.

Provides details about an array of BackupRule objects, each of which specifies a scheduled task that is used to back up a selection of resources.

Provides details about an Backup backup vault. In Backup, a backup vault is a container that stores and organizes your backups.

Provides details about the Amazon SNS event notifications for the specified backup vault.

Specifies how long in days before a recovery point transitions to cold storage or is deleted.

Contains information about the backup plan and rule that Backup used to initiate the recovery point backup.

Contains detailed information about the recovery points stored in an Backup backup vault. A backup, or recovery point, represents the content of a resource at a specified time.

Contains an array of Transition objects specifying how long in days before a recovery point transitions to cold storage or is deleted.

Provides details about an Certificate Manager certificate.

Contains information about one of the following:

Contains information about an extended key usage X.509 v3 extension object.

Contains information about a key usage X.509 v3 extension object.

Contains other options for the certificate.

Contains information about the Certificate Manager managed renewal for an AMAZON_ISSUED certificate.

Provides details about the CNAME record that is added to the DNS database for domain validation.

Nests a stack as a resource in a top-level template. Nested stacks are stacks created as resources for another stack.

Provides information about the stack's conformity to its expected template configuration.

Provides information about the CloudFormation stack output.

Information about a cache behavior for the distribution.

Provides information about caching for the CloudFront distribution.

Contains information about the default cache configuration for the CloudFront distribution.

A CloudFront distribution configuration.

A complex type that controls whether access logs are written for the CloudFront distribution.

A custom origin. A custom origin is any origin that is not an Amazon S3 bucket, with one exception. An Amazon S3 bucket that is configured with static website hosting is a custom origin.

Information about an origin group for the CloudFront distribution.

Provides information about when an origin group fails over.

The status codes that cause an origin group to fail over.

Provides information about origin groups that are associated with the CloudFront distribution.

A complex type that describes the Amazon S3 bucket, HTTP server (for example, a web server), AWS Elemental MediaStore, or other server from which CloudFront gets your files.

A complex type that contains information about origins and origin groups for this CloudFront distribution.

Information about an origin that is an Amazon S3 bucket that is not configured with static website hosting.

A complex type that contains information about the SSL/TLS protocols that CloudFront can use when establishing an HTTPS connection with your origin.

Provides information about the TLS/SSL configuration that the CloudFront distribution uses to communicate with viewers.

Provides details about a CloudTrail trail.

Specifies an alarm and associates it with the specified metric or metric math expression.

Details about the dimensions for the metric associated with the alarm.

Information about the build artifacts for the CodeBuild project.

Information about an CodeBuild project.

Information about the build environment for this build project.

Information about an environment variable that is available to builds for the build project.

The credentials for access to a private registry.

Information about CloudWatch Logs for the build project.

Information about logs for the build project.

Information about logs built to an S3 bucket for a build project.

Information about the build input source code for this build project.

Information about the VPC configuration that CodeBuild accesses.

Contains the cross-origin resource sharing (CORS) configuration for the API. CORS is only supported for HTTP APIs.

Contains a definition of an attribute for the table.

Provides information about the billing for read/write capacity on the table.

Provides details about a DynamoDB table.

Information abut a global secondary index for the table.

A component of the key schema for the DynamoDB table, a global secondary index, or a local secondary index.

Information about a local secondary index for a DynamoDB table.

For global and local secondary indexes, identifies the attributes that are copied from the table into the index.

Information about the provisioned throughput for the table or for a global secondary index.

Replica-specific configuration for the provisioned throughput.

Information about a replica of a DynamoDB table.

Information about a global secondary index for a DynamoDB table replica.

Information about the restore for the table.

Information about the server-side encryption for the table.

The current DynamoDB Streams configuration for the table.

Information about an Elastic IP address.

The details of an Amazon EC2 instance.

Metadata options that allow you to configure and secure the Amazon EC2 instance.

Identifies a network interface for the Amazon EC2 instance.

Information about a block device mapping for an Amazon Elastic Compute Cloud (Amazon EC2) launch template.

Parameters for a block device for an Amazon Elastic Block Store (Amazon EBS) volume in an Amazon EC2 launch template.

Information about the target Capacity Reservation or Capacity Reservation group in which to run an Amazon EC2 instance.

Specifies the Capacity Reservation targeting option of an Amazon EC2 instance.

Specifies the CPU options for an Amazon EC2 instance. For more information, see Optimize CPU options in the Amazon Elastic Compute Cloud User Guide.

Specifies the credit option for CPU usage of a T2, T3, or T3a Amazon EC2 instance.

The information to include in an Amazon Elastic Compute Cloud (Amazon EC2) launch template.

Provides details about an Elastic Graphics specification for an Amazon EC2 launch template.

Provides details for an Amazon Elastic Inference accelerator.

Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.

Specifies whether your Amazon EC2 instance is configured for hibernation.

Provides details for an Identity and Access Management (IAM) instance profile, which is a container for an IAM role for your instance.

Provides details about the market (purchasing) option for an Amazon EC2 instance.

Provides details about the market (purchasing) options for Spot Instances.

The minimum and maximum number of accelerators (GPUs, FPGAs, or Amazon Web Services Inferentia chips) on an Amazon EC2 instance.

The minimum and maximum amount of memory, in MiB, for the accelerators on an Amazon EC2 instance.

The minimum and maximum baseline bandwidth to Amazon Elastic Block Store (Amazon EBS), in Mbps. For more information, see Amazon EBS–optimized instances in the Amazon EC2 User Guide.

The attributes for the Amazon EC2 instance types.

The minimum and maximum amount of memory per vCPU, in GiB.

The minimum and maximum amount of memory, in MiB, for an Amazon EC2 instance.

The minimum and maximum number of network interfaces to be attached to an Amazon EC2 instance.

The minimum and maximum amount of total local storage, in GB, that an Amazon EC2 instance uses.

The minimum and maximum number of vCPUs for an Amazon EC2 instance.

Provides details about the license configuration for an Amazon EC2 instance.

The maintenance options of an Amazon EC2 instance.

Specifies the metadata options for an Amazon EC2 instance.

The monitoring for an Amazon EC2 instance.

One or more network interfaces to attach to an Amazon EC2 instance. If you specify a network interface, you must specify security groups and subnets as part of the network interface.

Provides details on one or more IPv4 prefixes for a network interface.

Specifies an IPv6 address in an Amazon EC2 launch template.

Provides details on one or more IPv6 prefixes to be assigned to the network interface.

One or more private IPv4 addresses.

Provides details about the placement of an Amazon EC2 instance.

Describes the options for Amazon EC2 instance hostnames.

Specifies the properties for creating an Amazon Elastic Compute Cloud (Amazon EC2) launch template.

An association between the network ACL and a subnet.

Contains details about an Amazon EC2 network access control list (ACL).

A rule for the network ACL. Each rule allows or denies access based on the IP address, traffic direction, port, and protocol.

Information about the network interface attachment.

Details about the network interface

Provides information about an IPV6 address that is associated with the network interface.

Provides information about a private IPv4 address that is with the network interface.

A security group associated with the network interface.

Details about an Amazon EC2 security group.

An IP permission for an EC2 security group.

A range of IPv4 addresses.

A range of IPv6 addresses.

A prefix list ID.

A relationship between a security group and a user.

Contains information about a subnet in Amazon EC2.

Information about an Amazon Web Services Amazon EC2 Transit Gateway that interconnects virtual private clouds (VPCs) and on-premises networks.

An attachment to an Amazon EC2 volume.

Details about an EC2 volume.

Details about an EC2 VPC.

Contains details about the service configuration for a VPC endpoint service.

The service type information for a VPC endpoint service.

Provides information about a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection.

Details about the status of the VPC peering connection.

Describes a VPC in a VPC peering connection.

Details about an Amazon EC2 VPN connection.

VPN connection options.

The VPN tunnel options.

A static routes associated with the VPN connection.

Information about the VPN tunnel.

Information about an Amazon ECR image.

Provides information about an Amazon Elastic Container Registry repository.

The image scanning configuration for a repository.

Information about the lifecycle policy for the repository.

Indicates whether to enable CloudWatch Container Insights for the ECS cluster.

The run command configuration for the cluster.

Contains the run command configuration for the cluster.

The log configuration for the results of the run command actions.

The default capacity provider strategy for the cluster. The default capacity provider strategy is used when services or tasks are run without a specified launch type or capacity provider strategy.

Provides details about an Amazon ECS cluster.

Provides information about an Amazon ECS container.

Strategy item for the capacity provider strategy that the service uses.

Determines whether a service deployment fails if a service cannot reach a steady state.

Optional deployment parameters for the service.

Information about the deployment controller type that the service uses.

Provides details about a service within an ECS cluster.

Information about a load balancer that the service uses.

For tasks that use the awsvpc networking mode, the VPC subnet and security group configuration.

For tasks that use the awsvpc networking mode, the VPC subnet and security group configuration.

A placement constraint for the tasks in the service.

A placement strategy that determines how to place the tasks for the service.

Information about a service discovery registry to assign to the service.

A dependency that is defined for container startup and shutdown.

A container definition that describes a container in the task.

An environment variable to pass to the container.

A file that contain environment variables to pass to a container.

A hostname and IP address mapping to append to the /etc/hosts file on the container.

The FireLens configuration for the container. The configuration specifies and configures a log router for container logs.

The container health check command and associated configuration parameters for the container.

The Linux capabilities for the container that are added to or dropped from the default configuration provided by Docker.

Linux-specific modifications that are applied to the container, such as Linux kernel capabilities.

A host device to expose to the container.

The container path, mount options, and size (in MiB) of a tmpfs mount.

The log configuration specification for the container.

A secret to pass to the log configuration.

A mount point for the data volumes in the container.

A port mapping for the container.

The private repository authentication credentials to use.

A resource to assign to a container.

A secret to pass to the container.

A namespaced kernel parameter to set in the container.

A ulimit to set in the container.

A data volume to mount from another container.

Details about a task definition. A task definition describes the container and volume definitions of an Amazon Elastic Container Service task.

An Elastic Inference accelerator to use for the containers in the task.

A placement constraint object to use for tasks.

The configuration details for the App Mesh proxy.

A network configuration parameter to provide to the Container Network Interface (CNI) plugin.

A data volume to mount from another container.

Information about a Docker volume.

Information about the Amazon Elastic File System file system that is used for task storage.

Information about a bind mount host volume.

Provides details about a task in a cluster.

Provides information about a data volume that's used in a task definition.

Provides details on a container instance bind mount host volume.

Provides information about an Amazon EFS access point.

Provides details for all file system operations using this Amazon EFS access point.

Provides information about the settings that Amazon EFS uses to create the root directory when a client connects to an access point.

Provides information about the directory on the Amazon EFS file system that the access point exposes as the root directory to NFS clients using the access point.

Provides details about an Amazon EKS cluster.

Details for a cluster logging configuration.

The logging configuration for an Amazon EKS cluster.

Information about the VPC configuration used by the cluster control plane.

Contains details about an Elastic Beanstalk environment.

Contains information about a link to another environment that is in the same group.

A configuration option setting for the environment.

Contains information about the tier of the environment.

Information about an Elasticsearch domain.

Additional options for the domain endpoint, such as whether to require HTTPS for all traffic.

details about the configuration of an OpenSearch cluster.

Configuration options for zone awareness.

Details about the configuration for encryption at rest.

configures the CloudWatch Logs to publish for the Elasticsearch domain.

The log configuration.

Details about the configuration for node-to-node encryption.

Information about the state of the domain relative to the latest service software.

Information that OpenSearch derives based on VPCOptions for the domain.

Contains information about a stickiness policy that was created using CreateAppCookieStickinessPolicy.

Contains information about a stickiness policy that was created using CreateLBCookieStickinessPolicy.

Contains information about the access log configuration for the load balancer.

Provides information about additional attributes for the load balancer.

Contains attributes for the load balancer.

Provides information about the configuration of an EC2 instance for the load balancer.

Contains information about the connection draining configuration for the load balancer.

Contains connection settings for the load balancer.

Contains cross-zone load balancing settings for the load balancer.

Contains details about a Classic Load Balancer.

Contains information about the health checks that are conducted on the load balancer.

Provides information about an EC2 instance for a load balancer.

Information about a load balancer listener.

Lists the policies that are enabled for a load balancer listener.

Contains information about the policies for a load balancer.

Contains information about the security group for the load balancer.

A load balancer attribute.

Information about a load balancer.

IAM access key details related to a finding.

Provides information about the session that the key was used for.

Attributes of the session that the key was used for.

Information about the entity that created the session.

A managed policy that is attached to an IAM principal.

Contains details about an IAM group.

A managed policy that is attached to the IAM group.

Information about an instance profile.

Information about a role associated with an instance profile.

Information about the policy used to set the permissions boundary for an IAM principal.

Represents an IAM permissions policy.

A version of an IAM policy.

Contains information about an IAM role, including all of the role's policies.

An inline policy that is embedded in the role.

Information about an IAM user.

Information about an inline policy that is embedded in the user.

Provides information about an Amazon Kinesis data stream.

Provides information about stream encryption.

Contains metadata about an KMS key.

The code for the Lambda function. You can specify either an object in Amazon S3, or upload a deployment package directly.

The dead-letter queue for failed asynchronous invocations.

Details about an Lambda function's configuration.

A function's environment variable settings.

Error messages for environment variables that could not be applied.

An Lambda layer.

The function's X-Ray tracing configuration.

The VPC security groups and subnets that are attached to a Lambda function.

Details about a Lambda layer version.

Details for a volume mount point that's used in a container definition.

Details about an Network Firewall firewall.

Details about a firewall policy. A firewall policy defines the behavior of a network firewall.

A public subnet that Network Firewall uses for the firewall.

Details about an Network Firewall rule group. Rule groups are used to inspect and control network traffic. Stateless rule groups apply to individual packets. Stateful rule groups apply to packets in the context of their traffic flow.

Provides information about domain access control options.

Details about the configuration of an OpenSearch cluster.

Configuration options for zone awareness.

Information about an Amazon OpenSearch Service domain.

Information about additional options for the domain endpoint.

Details about the configuration for encryption at rest for the OpenSearch domain.

Configuration details for a log publishing option.

Configures the CloudWatch Logs to publish for the OpenSearch domain.

Specifies information about the master user of the domain.

Provides details about the configuration for node-to-node encryption.

Provides information about the state of the domain relative to the latest service software.

Contains information that OpenSearch Service derives based on the VPCOptions for the domain.

An IAM role that is associated with the Amazon RDS DB cluster.

Information about an Amazon RDS DB cluster.

Information about an instance in the DB cluster.

Information about an option group membership for a DB cluster.

Information about an Amazon RDS DB cluster snapshot.

Information about an Active Directory domain membership record associated with the DB instance.

An IAM role associated with the DB instance.

Contains the details of an Amazon RDS DB instance.

Specifies the connection endpoint.

A VPC security groups that the DB instance belongs to.

An option group membership.

Provides information about a parameter group for a DB instance.

Changes to a DB instance that are currently pending.

A processor feature.

Provides information about an Amazon RDS DB security group.

EC2 security group information for an RDS DB security group.

IP range information for an RDS DB security group.

Provides details about an Amazon RDS DB cluster snapshot.

Information about the status of a read replica.

Information about the subnet group for the database instance.

Information about a subnet in a subnet group.

An Availability Zone for a subnet in a subnet group.

Details about an Amazon RDS event notification subscription. The subscription allows Amazon RDS to post events to an SNS topic.

Identifies the log types to enable and disable.

A node in an Amazon Redshift cluster.

A cluster parameter group that is associated with an Amazon Redshift cluster.

The status of a parameter in a cluster parameter group for an Amazon Redshift cluster.

A security group that is associated with the cluster.

You can configure Amazon Redshift to copy snapshots for a cluster to another Amazon Web Services Region. This parameter provides information about a cross-Region snapshot copy.

A time windows during which maintenance was deferred for an Amazon Redshift cluster.

Details about an Amazon Redshift cluster.

The status of the elastic IP (EIP) address for an Amazon Redshift cluster.

The connection endpoint for an Amazon Redshift cluster.

Information about whether an Amazon Redshift cluster finished applying any hardware changes to security module (HSM) settings that were specified in a modify cluster command.

An IAM role that the cluster can use to access other Amazon Web Services services.

Provides information about the logging status of the cluster.

Changes to the Amazon Redshift cluster that are currently pending.

Information about the resize operation for the cluster.

Information about the status of a cluster restore action. It only applies if the cluster was created by restoring a snapshot.

A VPC security group that the cluster belongs to, if the cluster is in a VPC.

provides information about the Amazon S3 Public Access Block configuration for accounts.

The lifecycle configuration for the objects in the S3 bucket.

Information about what Amazon S3 does when a multipart upload is incomplete.

Configuration for a lifecycle rule.

Identifies the objects that a rule applies to.

The configuration for the filter.

A value to use for the filter.

A tag that is assigned to matching objects.

A tag filter.

A transition rule that describes when noncurrent objects transition to a specified storage class.

A rule for when objects transition to specific storage classes.

Describes the versioning state of an S3 bucket.

The details of an Amazon S3 bucket.

Information about logging for the S3 bucket

The notification configuration for the S3 bucket.

Details for an S3 bucket notification configuration.

Filtering information for the notifications. The filtering is based on Amazon S3 key names.

Details for an Amazon S3 filter.

Details for a filter rule.

Specifies the default server-side encryption to apply to new objects in the bucket.

The encryption configuration for the S3 bucket.

An encryption rule to apply to the S3 bucket.

Website parameters for the S3 bucket.

The redirect behavior for requests to the website.

A rule for redirecting requests to the website.

The condition that must be met in order to apply the routing rule.

The rules to redirect the request if the condition in Condition is met.

Details about an Amazon S3 object.

Provides details about an Amazon SageMaker notebook instance.

Information on the instance metadata service (IMDS) configuration of the notebook instance.

Details about an Secrets Manager secret.

Defines the rotation schedule for the secret.

Provides a consistent format for Security Hub findings. AwsSecurityFinding format allows you to share findings between Amazon Web Services security services and third-party solutions.

A collection of attributes that are applied to all active Security Hub-aggregated findings and that result in a subset of findings that are included in this insight.

Identifies a finding to update using BatchUpdateFindings.

Provides information about an Amazon SNS topic to which notifications can be published.

A wrapper type for the attributes of an Amazon SNS subscription.

Data about a queue.

Provides the details about the compliance status for a patch.

Provides details about the compliance for a patch.

Provides information about the state of a patch on an instance based on the patch baseline that was used to patch the instance.

Details about a rate-based rule for global resources. A rate-based rule provides settings to indicate when to allow, block, or count a request. Rate-based rules include the number of requests that arrive over a specified period of time.

A match predicate. A predicate might look for characteristics such as specific IP addresses, geographic locations, or sizes.

contains details about a rate-based rule for Regional resources. A rate-based rule provides settings to indicate when to allow, block, or count a request. Rate-based rules include the number of requests that arrive over a specified period of time.

Details for a match predicate. A predicate might look for characteristics such as specific IP addresses, geographic locations, or sizes.

Provides information about an WAF Regional rule. This rule identifies the web requests that you want to allow, block, or count.

Provides information about an WAF Regional rule group. The rule group is a collection of rules for inspecting and controlling web requests.

Describes the action that WAF should take on a web request when it matches the criteria defined in the rule.

Provides information about the rules attached to a rule group

Provides details about the ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.

Provides information about the web access control list (web ACL). The web ACL contains the rules that identify the requests that you want to allow, block, or count.

The action that WAF takes when a web request matches all conditions in the rule, such as allow, block, or count the request.

A combination of ByteMatchSet, IPSet, and/or SqlInjectionMatchSet objects that identify the web requests that you want to allow, block, or count.

Provides details about the action to use in the place of the action that results from the rule group evaluation.

Provides information about a WAF rule. This rule specifies the web requests that you want to allow, block, or count.

Provides information about an WAF rule group. A rule group is a collection of rules for inspecting and controlling web requests.

Provides information about what action WAF should take on a web request when it matches the criteria defined in the rule.

Provides information about the rules attached to the rule group. These rules identify the web requests that you want to allow, block, or count.

Provides details about the ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, and SizeConstraintSet objects that you want to add to a rule and, for each object, indicates whether you want to negate the settings.

Specifies that WAF should allow the request and optionally defines additional custom handling for the request.

Specifies that WAF should block the request and optionally defines additional custom handling for the response to the web request.

A custom header for custom request and response handling.

Custom request handling behavior that inserts custom headers into a web request. WAF uses custom request handling when the rule action doesn't block the request.

A custom response to send to the client. You can define a custom response for rule actions and default web ACL actions that are set to block.

Details about an WAFv2 rule group.

Specifies that WAF should run a CAPTCHA check against the request.

Specifies that WAF should count the request.

The action that WAF should take on a web request when it matches a rule's statement. Settings at the web ACL level can override the rule action setting.

Provides details about rules in a rule group. A rule identifies web requests that you want to allow, block, or count. Each rule includes one top-level Statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.

Defines and enables Amazon CloudWatch metrics and web request sample collection.

Specifies the action that Amazon CloudFront or WAF takes when a web request matches the conditions in the rule.

Specifies how WAF should handle CAPTCHA evaluations for rules that don't have their own CaptchaConfig settings.

Used for CAPTCHA and challenge token settings. Determines how long a CAPTCHA or challenge timestamp remains valid after WAF updates it for a successful CAPTCHA or challenge response.

Details about an WAFv2 web Access Control List (ACL).

Provides information about an WAF web access control list (web ACL).

Details for a rule in an WAF web ACL.

Information about the encryption configuration for X-Ray.

A finding from a BatchUpdateFindings request that Security Hub was unable to update.

Boolean filter for querying findings.

An occurrence of sensitive data detected in a Microsoft Excel workbook, comma-separated value (CSV) file, or tab-separated value (TSV) file.

An IPv4 CIDR block association.

Information about a city.

Details about the sensitive data that was detected on the resource.

Provides details about the current status of the sensitive data detection.

Contains finding details that are specific to control-based findings. Only returned for findings generated from controls.

Container details related to a finding.

Information about a country.

The list of detected instances of sensitive data.

Contains an instance of sensitive data that was detected by a customer-defined identifier.

CVSS scores from the advisory related to the vulnerability.

Provides details about sensitive data that was detected on a resource.

A date filter for querying findings.

A date range for the date filter.

Provided if ActionType is DNS_REQUEST. It provides details about the DNS request that was detected.

Provides information about the file paths that were affected by the threat.

A finding aggregator. A finding aggregator contains the configuration for finding aggregation.

In a BatchImportFindings request, finding providers use FindingProviderFields to provide and update values for confidence, criticality, related findings, severity, and types.

The severity assigned to the finding by the finding provider.

Defines the behavior of the firewall.

A stateful rule group that is used by the firewall policy.

A custom action that can be used for stateless packet handling.

A stateless rule group that is used by the firewall policy.

Provides the latitude and longitude coordinates of a location.

An Internet Control Message Protocol (ICMP) type and code.

The list of the findings that cannot be imported. For each finding, the list provides the error.

Contains information about a Security Hub insight.

The insight results returned by the GetInsightResults operation.

The insight result values returned by the GetInsightResults operation.

Details about an invitation.

The IP filter for querying findings.

Provides information about an internet provider.

An IPV6 CIDR block association.

A keyword filter for querying findings.

Information about the state of the load balancer.

A list of malware related to a finding.

A map filter for querying findings. Each map filter provides the field to check, the value to look for, and the comparison operator.

The details about a member account.

The details of network-related information about a finding.

Provided if ActionType is NETWORK_CONNECTION. It provides details about the attempted network connection that was detected.

Details about a network path component that occurs before or after the current component.

Information about a network path component.

Information about the destination of the next component in the network path.

A user-defined note added to a finding.

The updated note.

A number filter for querying findings.

The detected occurrences of sensitive data.

An occurrence of sensitive data in an Adobe Portable Document Format (PDF) file.

Provides an overview of the patch compliance status for an instance against a selected compliance standard.

Provided if ActionType is PORT_PROBE. It provides details about the attempted port probe that was detected.

A port scan that was part of the port probe. For each scan, PortProbeDetails provides information about the local IP address and port that were scanned, and the remote IP address that the scan originated from.

A range of ports.

A range of ports.

The details of process-related information about a finding.

Contains details about a product.

Identifies where the sensitive data begins and ends.

A recommendation on how to remediate the issue identified in a finding.

An occurrence of sensitive data in an Apache Avro object container or an Apache Parquet file.

Details about a related finding.

Details about the remediation steps for a finding.

A resource related to a finding.

Additional details about a resource related to a finding.

Details about the account that was not processed.

Details about the rule group.

The rules and actions for the rule group.

A custom action definition. A custom action is an optional, non-standard action to use for stateless packet handling.

Stateful inspection criteria for a domain list rule group.

A Suricata rule specification.

The inspection criteria for a stateful rule.

A rule option for a stateful rule.

The definition of the stateless rule.

Criteria for the stateless rule.

A port range to specify the destination ports to inspect for.

A destination IP address or range.

A port range to specify the source ports to inspect for.

A source IP addresses and address range to inspect for.

A set of TCP flags and masks to inspect for.

Stateless rules and custom actions for a stateless rule group.

A stateless rule in the rule group.

Additional settings to use in the specified rules.

A list of IP addresses and address ranges, in CIDR notation.

A list of port ranges.

A security control in Security Hub describes a security best practice related to a specific resource.

Provides metadata for a security control, including its unique standard-agnostic identifier, title, description, severity, availability in Amazon Web Services Regions, and a link to remediation steps.

The list of detected instances of sensitive data.

Contains a detected instance of sensitive data that are based on built-in identifiers.

The severity of the finding.

Updates to the severity information for a finding.

Information about a software package.

A collection of finding attributes used to sort findings.

Provides information about a specific security standard.

Details for an individual security standard control.

Provides details about a control's enablement status in a specified standard.

An array with one or more objects that includes a security control (identified with SecurityControlId, SecurityControlArn, or a mix of both parameters) and the Amazon Resource Name (ARN) of a standard. The security control ID or ARN is the same across standards.

An array that provides the enablement status and other details for each control that applies to each enabled standard.

An array of requested updates to the enablement status of controls in specified standards. The objects in the array include a security control ID, the Amazon Resource Name (ARN) of the standard, the requested enablement status, and the reason for updating the enablement status.

Provides details about the management of a security standard.

The reason for the current status of a standard subscription.

A resource that represents your subscription to a supported standard.

The standard that you want to enable.

The definition of a custom action that can be used for stateless packet handling.

Information about metrics to publish to CloudWatch.

Defines a CloudWatch dimension value to publish.

Provides additional context for the value of Compliance.Status.

A string filter for querying findings.

Provides information about the threat detected in a security finding and the file paths that were affected by the threat.

Details about the threat intelligence related to a finding.

Provides details about a security control for which a response couldn't be returned.

Provides details about which control's enablement status couldn't be retrieved in a specified standard when calling BatchUpdateStandardsControlAssociations. This parameter also provides details about why the request was unprocessed.

Provides details about which control's enablement status could not be updated in a specified standard when calling the BatchUpdateStandardsControlAssociations API. This parameter also provides details about why the request was unprocessed.

Describes the mounting of a volume in a container.

Provides details about the IPv4 CIDR blocks for the VPC.

Provides details about the IPv6 CIDR blocks for the VPC.

Provides information about the VPC peering connection options for the accepter or requester VPC.

A vulnerability associated with a finding.

A vendor that generates a vulnerability report.

Details about the action that CloudFront or WAF takes when a web request matches the conditions in the rule.

Details about a rule to exclude from a rule group.

Details about an override action for a rule.

Provides information about the status of the investigation into a finding.

Used to update information about the investigation into the finding.