The criteria that determine when and how a job abort takes place.

The criteria that determine when and how a job abort takes place.

The input for the AcceptCertificateTransfer operation.

Describes the actions associated with a rule.

Information about an active Device Defender security profile behavior violation.

Parameters used when defining a mitigation action that move a set of things to a thing group.

The type of aggregation queries.

A structure containing the alert target ARN and the role ARN.

Contains information that allowed the authorization.

An asset property timestamp entry containing the following information.

An asset property value entry containing the following information.

Contains an asset property value (of a single type).

The input for the AttachPrincipalPolicy operation.

The input for the AttachThingPrincipal operation.

The attribute payload.

Which audit checks are enabled and disabled for this account.

Information about the audit check.

The findings (results) of the audit.

Returned by ListAuditMitigationActionsTask, this object contains information that describes a mitigation action that has been started.

Information about an audit mitigation actions task that is returned by ListAuditMitigationActionsTasks.

Used in MitigationActionParams, this information identifies the target findings to which the mitigation actions are applied. Only one entry appears.

Information about the targets to which audit notifications are sent.

Filters out specific findings of a Device Defender audit.

The audits that were performed.

A collection of authorization information.

An object that specifies the authorization service for a domain.

The authorizer description.

The authorizer summary.

The authorizer result.

The criteria that determine when and how a job abort takes place.

The criteria that determine when and how a job abort takes place.

Configuration for the rollout of OTA updates.

The rate of increase for a job rollout. This parameter allows you to define an exponential rate increase for a job rollout.

Configuration information for pre-signed URLs. Valid when protocols contains HTTP.

The criteria to initiate the increase in rate of rollout for a job.

Specifies the amount of time each device has to finish its execution of the job. A timer is started when the job execution status is set to IN_PROGRESS. If the job execution status is not set to another terminal state before the timer expires, it will be automatically set to TIMED_OUT.

A Device Defender security profile behavior.

The criteria by which the behavior is determined to be normal.

The summary of an ML Detect behavior model.

Additional information about the billing group.

The properties of a billing group.

A count of documents that meets a specific aggregation criteria.

The type of bucketed aggregation performed.

A CA certificate.

Describes a CA certificate.

The input for the CancelCertificateTransfer operation.

Information about a certificate.

Describes a certificate.

When the certificate is valid.

Describes an action that updates a CloudWatch alarm.

Describes an action that sends data to CloudWatch Logs.

Describes an action that captures a CloudWatch metric.

Describes the method to use when code signing a file.

Describes the certificate chain being used when code signing a file.

Describes the signature for a file.

Configuration.

The input for the CreateCertificateFromCsr operation.

The output from the CreateCertificateFromCsr operation.

The input for the CreateKeysAndCertificate operation.

The output of the CreateKeysAndCertificate operation.

The input for the CreatePolicy operation.

The output from the CreatePolicy operation.

The input for the CreatePolicyVersion operation.

The output of the CreatePolicyVersion operation.

The input for the CreateThing operation.

The output of the CreateThing operation.

The input for the CreateThingType operation.

The output of the CreateThingType operation.

The input for the CreateTopicRule operation.

Describes a custom method used to code sign a file.

Input for the DeleteCACertificate operation.

The input for the DeleteCertificate operation.

The input for the DeletePolicy operation.

The input for the DeletePolicyVersion operation.

The input for the DeleteThing operation.

The input for the DeleteThingType operation.

The input for the DeleteTopicRule operation.

Contains information that denied the authorization.

The input for the DeprecateThingType operation.

The input for the DescribeCACertificate operation.

The output from the DescribeCACertificate operation.

The input for the DescribeCertificate operation.

The output of the DescribeCertificate operation.

The input for the DescribeEndpoint operation.

The output from the DescribeEndpoint operation.

The input for the DescribeThing operation.

The output from the DescribeThing operation.

The input for the DescribeThingType operation.

The output for the DescribeThingType operation.

Describes the location of the updated firmware.

The input for the DetachPrincipalPolicy operation.

The input for the DetachThingPrincipal operation.

Describes which mitigation actions should be executed.

The statistics of a mitigation action task.

The summary of the mitigation action tasks.

The target of a mitigation action task.

The input for the DisableTopicRuleRequest operation.

A map of key-value pairs containing the patterns that need to be replaced in a managed template job document schema. You can use the description of each key as a guidance to specify the inputs during runtime when creating a job.

The summary of a domain configuration. A domain configuration specifies custom IoT-specific information about a domain. A domain configuration can be associated with an Amazon Web Services-managed domain (for example, dbc123defghijk.iot.us-west-2.amazonaws.com), a customer managed domain, or a default endpoint.

Describes an action to write to a DynamoDB table.

Describes an action to write to a DynamoDB table.

The policy that has the effect on the authorization results.

Describes an action that writes data to an Amazon OpenSearch Service domain.

Parameters used when defining a mitigation action that enable Amazon Web Services IoT Core logging.

The input for the EnableTopicRuleRequest operation.

Error information.

Information that explicitly denies authorization.

Allows you to create an exponential rate of rollout for a job.

Describes the name and data type at a field.

The location of the OTA update.

Describes an action that writes data to an Amazon Kinesis Firehose stream.

The name and ARN of a fleet metric.

The output from the GetLoggingOptions operation.

The input for the GetPolicy operation.

The output from the GetPolicy operation.

The input for the GetPolicyVersion operation.

The output from the GetPolicyVersion operation.

The output from the GetRegistrationCode operation.

The input for the GetTopicRule operation.

The output from the GetTopicRule operation.

The name and ARN of a group.

Send data to an HTTPS endpoint.

The HTTP action header.

The authorization method used to send messages.

Specifies the HTTP context to use for the test authorizer request.

HTTP URL destination configuration used by the topic rule's HTTP action.

HTTP URL destination properties.

Information about an HTTP URL destination.

Information that implicitly denies authorization. When policy doesn't explicitly deny or allow an action on a resource it is considered an implicit deny.

Provides additional filters for specific data sources. Named shadow is the only data source that currently supports and requires a filter. To add named shadows to your fleet indexing configuration, set namedShadowIndexingMode to be ON and specify your shadow names in filter.

Sends message data to an IoT Analytics channel.

Sends an input to an IoT Events detector.

Describes an action to send data from an MQTT message that triggered the rule to IoT SiteWise asset properties.

The certificate issuer indentifier.

The Job object contains details about a job.

The job execution object represents the execution of a job on a particular device.

The configuration that determines how many retries are allowed for each failure type for a job.

Allows you to create a staged rollout of a job.

Details of the job execution status.

The job execution summary.

Contains a summary of information about job executions for a specific job.

The job execution summary for a thing.

The job process details.

The job summary.

An object that contains information about the job template.

Send messages to an Amazon Managed Streaming for Apache Kafka (Amazon MSK) or self-managed Apache Kafka cluster.

Describes a key pair.

Describes an action to write data to an Amazon Kinesis stream.

Describes an action to invoke a Lambda function.

Input for the ListCACertificates operation.

The output from the ListCACertificates operation.

The input to the ListCertificatesByCA operation.

The output of the ListCertificatesByCA operation.

The input for the ListCertificates operation.

The output of the ListCertificates operation.

The input to the ListOutgoingCertificates operation.

The output from the ListOutgoingCertificates operation.

The input for the ListPolicies operation.

The output from the ListPolicies operation.

The input for the ListPolicyPrincipals operation.

The output from the ListPolicyPrincipals operation.

The input for the ListPolicyVersions operation.

The output from the ListPolicyVersions operation.

The input for the ListPrincipalPolicies operation.

The output from the ListPrincipalPolicies operation.

The input for the ListPrincipalThings operation.

The output from the ListPrincipalThings operation.

The input for the ListThingPrincipal operation.

The output from the ListThingPrincipals operation.

The input for the ListThings operation.

The output from the ListThings operation.

The input for the ListThingTypes operation.

The output for the ListThingTypes operation.

The input for the ListTopicRules operation.

The output from the ListTopicRules operation.

The Amazon Location rule action sends device location updates from an MQTT message to an Amazon Location tracker resource.

Describes how to interpret an application-defined timestamp value from an MQTT message payload and the precision of that value.

Describes the logging options payload.

A log target.

The target configuration.

The configuration of an ML Detect Security Profile.

An object that contains information about the managed template.

A metric.

The dimension of a metric.

The metric you want to retain. Dimensions are optional.

The value to be compared with the metric.

Describes which changes should be applied as part of a mitigation action.

Information that identifies a mitigation action. This information is returned by ListMitigationActions.

The set of parameters for this mitigation action. You can specify only one type of parameter (in other words, you can apply only one action for each defined mitigation action).

Specifies the MQTT context to use for the test authorizer request

Specifies MQTT Version 5.0 headers information. For more information, see MQTT from Amazon Web Services IoT Core Developer Guide.

Information about the resource that was noncompliant with the audit check.

Describes an action that writes data to an Amazon OpenSearch Service domain.

Describes a file to be associated with an OTA update.

Information about an OTA update.

An OTA update summary.

A certificate that has been transferred but not yet accepted.

Describes the percentile and percentile value.

Describes an IoT policy.

Describes a policy version.

Information about the version of the policy associated with the resource.

Configuration for pre-signed S3 URLs.

Structure that contains payloadVersion and targetArn.

A summary of information about a provisioning template.

A summary of information about a fleet provision template version.

Parameters to define a mitigation action that publishes findings to Amazon SNS. You can implement your own custom actions in response to the Amazon SNS messages.

An asset property value entry containing the following information.

The input for the DynamoActionVS action that specifies the DynamoDB table to which the message data will be written.

Allows you to define a criteria to initiate the increase in rate of rollout for a job.

The input to the RegisterCACertificate operation.

The output from the RegisterCACertificateResponse operation.

The input to the RegisterCertificate operation.

The output from the RegisterCertificate operation.

The registration configuration.

The input for the RejectCertificateTransfer operation.

Information about a related resource.

Parameters to define a mitigation action that adds a blank policy to restrict permissions.

The input for the ReplaceTopicRule operation.

Describes an action to republish to another topic.

Information that identifies the noncompliant resource.

The criteria that determines how many retries are allowed for each failure type for a job.

Role alias description.

Describes an action to write data to an Amazon S3 bucket.

Describes the location of updated firmware in S3.

The S3 location.

Describes an action to write a message to a Salesforce IoT Cloud Input Stream.

Information about the scheduled audit.

Specifies the date and time that a job will begin the rollout of the job document to all devices in the target group. Additionally, you can specify the end behavior for each job execution when it reaches the scheduled end time.

Identifying information for a Device Defender security profile.

A target to which an alert is sent when a security profile behavior is violated.

Information about a security profile and the target associated with it.

An object that contains information about a server certificate.

The input for the SetDefaultPolicyVersion operation.

The input for the SetLoggingOptions operation.

Describes the code-signing profile.

For more information, see Signature Version 4 signing process.

Describes an action to publish to an Amazon SNS topic.

Describes an action to publish data to an Amazon SQS queue.

Information required to start a signing job.

A statistical ranking (percentile) that indicates a threshold value by which a behavior is determined to be in compliance or in violation of the behavior.

A map of key-value pairs for all supported statistics. For issues with missing or unexpected values for this API, consult Fleet indexing troubleshooting guide.

Starts execution of a Step Functions state machine.

Describes a group of files that can be streamed.

Represents a file to stream.

Information about a stream.

A summary of a stream.

A set of key/value pairs that are used to manage the resource.

Statistics for the checks performed during the audit.

Provides summary counts of how many tasks for findings are in a particular state. This information is included in the response from DescribeAuditMitigationActionsTask.

Performs an aggregation that will return a list of buckets. The list of buckets is a ranked list of the number of occurrences of an aggregation field value.

The properties of the thing, including thing name, thing type name, and a list of thing attributes.

The connectivity status of the thing.

The thing search index document.

The thing group search index document.

Thing group indexing configuration.

Thing group metadata.

Thing group properties.

The thing indexing configuration. For more information, see Managing Thing Indexing.

The definition of the thing type, including thing type name and description.

The ThingTypeMetadata contains additional information about the thing type including: creation date and time, a value indicating whether the thing type is deprecated, and a date and time when time was deprecated.

The ThingTypeProperties contains information about the thing type including: a thing type description, and a list of searchable thing attribute names.

Specifies the amount of time each device has to finish its execution of the job. A timer is started when the job execution status is set to IN_PROGRESS. If the job execution status is not set to another terminal state before the timer expires, it will be automatically set to TIMED_OUT.

The Timestream rule action writes attributes (measures) from an MQTT message into an Amazon Timestream table. For more information, see the Timestream topic rule action documentation.

Metadata attributes of the time series that are written in each measure record.

Describes how to interpret an application-defined timestamp value from an MQTT message payload and the precision of that value.

Specifies the TLS context to use for the test authorizer request.

Describes a rule.

A topic rule destination.

Configuration of the topic rule destination.

Information about the topic rule destination.

Describes a rule.

Describes a rule.

The input for the TransferCertificate operation.

The output from the TransferCertificate operation.

Data used to transfer a certificate to an Amazon Web Services account.

Parameters to define a mitigation action that changes the state of the CA certificate to inactive.

The input to the UpdateCACertificate operation.

The input for the UpdateCertificate operation.

Parameters to define a mitigation action that changes the state of the device certificate to inactive.

The input for the UpdateThing operation.

A key-value pair that you define in the header. Both the key and the value are either literal strings or valid substitution templates.

Information about an error found in a behavior specification.

Information about a Device Defender security profile behavior violation.

The details of a violation event.

Specifies the time period of which violation events occurred between.

The configuration information for a virtual private cloud (VPC) destination.

The properties of a virtual private cloud (VPC) destination.

The summary of a virtual private cloud (VPC) destination.

The type of alert target: one of "SNS".