import * as mod from "https://aws-api-bqtgftz736ft.deno.dev/v0.5/services/medialive.ts?docs=full";| AacSettings | Aac Settings |
| Ac3Settings | Ac3 Settings |
| AcceptInputDeviceTransferRequest | Placeholder documentation for AcceptInputDeviceTransferRequest |
| AccountConfiguration | Placeholder documentation for AccountConfiguration |
| AncillarySourceSettings | Ancillary Source Settings |
| ArchiveCdnSettings | Archive Cdn Settings |
| ArchiveContainerSettings | Archive Container Settings |
| ArchiveGroupSettings | Archive Group Settings |
| ArchiveOutputSettings | Archive Output Settings |
| ArchiveS3Settings | Archive S3 Settings |
| AribDestinationSettings | Arib Destination Settings |
| AribSourceSettings | Arib Source Settings |
| AudioChannelMapping | Audio Channel Mapping |
| AudioCodecSettings | Audio Codec Settings |
| AudioDescription | Audio Description |
| AudioDolbyEDecode | Audio Dolby EDecode |
| AudioHlsRenditionSelection | Audio Hls Rendition Selection |
| AudioLanguageSelection | Audio Language Selection |
| AudioNormalizationSettings | Audio Normalization Settings |
| AudioOnlyHlsSettings | Audio Only Hls Settings |
| AudioPidSelection | Audio Pid Selection |
| AudioSelector | Audio Selector |
| AudioSelectorSettings | Audio Selector Settings |
| AudioSilenceFailoverSettings | Placeholder documentation for AudioSilenceFailoverSettings |
| AudioTrack | Audio Track |
| AudioTrackSelection | Audio Track Selection |
| AudioWatermarkSettings | Audio Watermark Settings |
| AutomaticInputFailoverSettings | The settings for Automatic Input Failover. |
| AvailBlanking | Avail Blanking |
| AvailConfiguration | Avail Configuration |
| AvailSettings | Avail Settings |
| BatchDeleteRequest | A request to delete resources |
| BatchDeleteResponse | Placeholder documentation for BatchDeleteResponse |
| BatchFailedResultModel | Details from a failed operation |
| BatchScheduleActionCreateRequest | A list of schedule actions to create (in a request) or that have been created (in a response). |
| BatchScheduleActionCreateResult | List of actions that have been created in the schedule. |
| BatchScheduleActionDeleteRequest | A list of schedule actions to delete. |
| BatchScheduleActionDeleteResult | List of actions that have been deleted from the schedule. |
| BatchStartRequest | A request to start resources |
| BatchStartResponse | Placeholder documentation for BatchStartResponse |
| BatchStopRequest | A request to stop resources |
| BatchStopResponse | Placeholder documentation for BatchStopResponse |
| BatchSuccessfulResultModel | Details from a successful operation |
| BatchUpdateScheduleRequest | List of actions to create and list of actions to delete. |
| BatchUpdateScheduleResponse | Placeholder documentation for BatchUpdateScheduleResponse |
| BlackoutSlate | Blackout Slate |
| BurnInDestinationSettings | Burn In Destination Settings |
| CancelInputDeviceTransferRequest | Placeholder documentation for CancelInputDeviceTransferRequest |
| CaptionDescription | Caption Description |
| CaptionDestinationSettings | Caption Destination Settings |
| CaptionLanguageMapping | Maps a caption channel to an ISO 693-2 language code (http://www.loc.gov/standards/iso639-2), with an optional description. |
| CaptionRectangle | Caption Rectangle |
| CaptionSelector | Caption Selector |
| CaptionSelectorSettings | Caption Selector Settings |
| CdiInputSpecification | Placeholder documentation for CdiInputSpecification |
| Channel | Placeholder documentation for Channel |
| ChannelEgressEndpoint | Placeholder documentation for ChannelEgressEndpoint |
| ChannelSummary | Placeholder documentation for ChannelSummary |
| ClaimDeviceRequest | A request to claim an AWS Elemental device that you have purchased from a third-party vendor. |
| CloudWatchAlarmTemplateGroupSummary | Placeholder documentation for CloudWatchAlarmTemplateGroupSummary |
| CloudWatchAlarmTemplateSummary | Placeholder documentation for CloudWatchAlarmTemplateSummary |
| CmafIngestGroupSettings | Cmaf Ingest Group Settings |
| CmafIngestOutputSettings | Cmaf Ingest Output Settings |
| ColorCorrection | Property of ColorCorrectionSettings. Used for custom color space conversion. The object identifies one 3D LUT file and specifies the input/output color space combination that the file will be used for. |
| ColorCorrectionSettings | Property of encoderSettings. Controls color conversion when you are using 3D LUT files to perform color conversion on video. |
| ColorSpacePassthroughSettings | Passthrough applies no color space conversion to the output |
| CreateChannelRequest | A request to create a channel |
| CreateChannelResponse | Placeholder documentation for CreateChannelResponse |
| CreateCloudWatchAlarmTemplateGroupRequest | Placeholder documentation for CreateCloudWatchAlarmTemplateGroupRequest |
| CreateCloudWatchAlarmTemplateGroupResponse | Placeholder documentation for CreateCloudWatchAlarmTemplateGroupResponse |
| CreateCloudWatchAlarmTemplateRequest | Placeholder documentation for CreateCloudWatchAlarmTemplateRequest |
| CreateCloudWatchAlarmTemplateResponse | Placeholder documentation for CreateCloudWatchAlarmTemplateResponse |
| CreateEventBridgeRuleTemplateGroupRequest | Placeholder documentation for CreateEventBridgeRuleTemplateGroupRequest |
| CreateEventBridgeRuleTemplateGroupResponse | Placeholder documentation for CreateEventBridgeRuleTemplateGroupResponse |
| CreateEventBridgeRuleTemplateRequest | Placeholder documentation for CreateEventBridgeRuleTemplateRequest |
| CreateEventBridgeRuleTemplateResponse | Placeholder documentation for CreateEventBridgeRuleTemplateResponse |
| CreateInputRequest | The name of the input |
| CreateInputResponse | Placeholder documentation for CreateInputResponse |
| CreateInputSecurityGroupRequest | The IPv4 CIDRs to whitelist for this Input Security Group |
| CreateInputSecurityGroupResponse | Placeholder documentation for CreateInputSecurityGroupResponse |
| CreateMultiplexProgramRequest | A request to create a program in a multiplex. |
| CreateMultiplexProgramResponse | Placeholder documentation for CreateMultiplexProgramResponse |
| CreateMultiplexRequest | A request to create a multiplex. |
| CreateMultiplexResponse | Placeholder documentation for CreateMultiplexResponse |
| CreatePartnerInputRequest | A request to create a partner input |
| CreatePartnerInputResponse | Placeholder documentation for CreatePartnerInputResponse |
| CreateSignalMapRequest | Placeholder documentation for CreateSignalMapRequest |
| CreateSignalMapResponse | Placeholder documentation for CreateSignalMapResponse |
| CreateTagsRequest | Placeholder documentation for CreateTagsRequest |
| DeleteChannelRequest | Placeholder documentation for DeleteChannelRequest |
| DeleteChannelResponse | Placeholder documentation for DeleteChannelResponse |
| DeleteCloudWatchAlarmTemplateGroupRequest | Placeholder documentation for DeleteCloudWatchAlarmTemplateGroupRequest |
| DeleteCloudWatchAlarmTemplateRequest | Placeholder documentation for DeleteCloudWatchAlarmTemplateRequest |
| DeleteEventBridgeRuleTemplateGroupRequest | Placeholder documentation for DeleteEventBridgeRuleTemplateGroupRequest |
| DeleteEventBridgeRuleTemplateRequest | Placeholder documentation for DeleteEventBridgeRuleTemplateRequest |
| DeleteInputRequest | Placeholder documentation for DeleteInputRequest |
| DeleteInputSecurityGroupRequest | Placeholder documentation for DeleteInputSecurityGroupRequest |
| DeleteMultiplexProgramRequest | Placeholder documentation for DeleteMultiplexProgramRequest |
| DeleteMultiplexProgramResponse | Placeholder documentation for DeleteMultiplexProgramResponse |
| DeleteMultiplexRequest | Placeholder documentation for DeleteMultiplexRequest |
| DeleteMultiplexResponse | Placeholder documentation for DeleteMultiplexResponse |
| DeleteReservationRequest | Placeholder documentation for DeleteReservationRequest |
| DeleteReservationResponse | Placeholder documentation for DeleteReservationResponse |
| DeleteScheduleRequest | Placeholder documentation for DeleteScheduleRequest |
| DeleteSignalMapRequest | Placeholder documentation for DeleteSignalMapRequest |
| DeleteTagsRequest | Placeholder documentation for DeleteTagsRequest |
| DescribeAccountConfigurationResponse | Placeholder documentation for DescribeAccountConfigurationResponse |
| DescribeChannelRequest | Placeholder documentation for DescribeChannelRequest |
| DescribeChannelResponse | Placeholder documentation for DescribeChannelResponse |
| DescribeInputDeviceRequest | Placeholder documentation for DescribeInputDeviceRequest |
| DescribeInputDeviceResponse | Placeholder documentation for DescribeInputDeviceResponse |
| DescribeInputDeviceThumbnailRequest | Placeholder documentation for DescribeInputDeviceThumbnailRequest |
| DescribeInputDeviceThumbnailResponse | Placeholder documentation for DescribeInputDeviceThumbnailResponse |
| DescribeInputRequest | Placeholder documentation for DescribeInputRequest |
| DescribeInputResponse | Placeholder documentation for DescribeInputResponse |
| DescribeInputSecurityGroupRequest | Placeholder documentation for DescribeInputSecurityGroupRequest |
| DescribeInputSecurityGroupResponse | Placeholder documentation for DescribeInputSecurityGroupResponse |
| DescribeMultiplexProgramRequest | Placeholder documentation for DescribeMultiplexProgramRequest |
| DescribeMultiplexProgramResponse | Placeholder documentation for DescribeMultiplexProgramResponse |
| DescribeMultiplexRequest | Placeholder documentation for DescribeMultiplexRequest |
| DescribeMultiplexResponse | Placeholder documentation for DescribeMultiplexResponse |
| DescribeOfferingRequest | Placeholder documentation for DescribeOfferingRequest |
| DescribeOfferingResponse | Placeholder documentation for DescribeOfferingResponse |
| DescribeReservationRequest | Placeholder documentation for DescribeReservationRequest |
| DescribeReservationResponse | Placeholder documentation for DescribeReservationResponse |
| DescribeScheduleRequest | Placeholder documentation for DescribeScheduleRequest |
| DescribeScheduleResponse | Placeholder documentation for DescribeScheduleResponse |
| DescribeThumbnailsRequest | Placeholder documentation for DescribeThumbnailsRequest |
| DescribeThumbnailsResponse | Placeholder documentation for DescribeThumbnailsResponse |
| DolbyVision81Settings | Dolby Vision81 Settings |
| DvbNitSettings | DVB Network Information Table (NIT) |
| DvbSdtSettings | DVB Service Description Table (SDT) |
| DvbSubDestinationSettings | Dvb Sub Destination Settings |
| DvbSubSourceSettings | Dvb Sub Source Settings |
| DvbTdtSettings | DVB Time and Date Table (SDT) |
| Eac3AtmosSettings | Eac3 Atmos Settings |
| Eac3Settings | Eac3 Settings |
| EbuTtDDestinationSettings | Ebu Tt DDestination Settings |
| EmbeddedDestinationSettings | Embedded Destination Settings |
| EmbeddedPlusScte20DestinationSettings | Embedded Plus Scte20 Destination Settings |
| EmbeddedSourceSettings | Embedded Source Settings |
| EncoderSettings | Encoder Settings |
| EpochLockingSettings | Epoch Locking Settings |
| Esam | Esam |
| EventBridgeRuleTemplateGroupSummary | Placeholder documentation for EventBridgeRuleTemplateGroupSummary |
| EventBridgeRuleTemplateSummary | Placeholder documentation for EventBridgeRuleTemplateSummary |
| EventBridgeRuleTemplateTarget | The target to which to send matching events. |
| FailoverCondition | Failover Condition settings. There can be multiple failover conditions inside AutomaticInputFailoverSettings. |
| FailoverConditionSettings | Settings for one failover condition. |
| FeatureActivations | Feature Activations |
| FecOutputSettings | Fec Output Settings |
| FixedModeScheduleActionStartSettings | Start time for the action. |
| Fmp4HlsSettings | Fmp4 Hls Settings |
| FollowModeScheduleActionStartSettings | Settings to specify if an action follows another. |
| FrameCaptureCdnSettings | Frame Capture Cdn Settings |
| FrameCaptureGroupSettings | Frame Capture Group Settings |
| FrameCaptureHlsSettings | Frame Capture Hls Settings |
| FrameCaptureOutputSettings | Frame Capture Output Settings |
| FrameCaptureS3Settings | Frame Capture S3 Settings |
| FrameCaptureSettings | Frame Capture Settings |
| GetCloudWatchAlarmTemplateGroupRequest | Placeholder documentation for GetCloudWatchAlarmTemplateGroupRequest |
| GetCloudWatchAlarmTemplateGroupResponse | Placeholder documentation for GetCloudWatchAlarmTemplateGroupResponse |
| GetCloudWatchAlarmTemplateRequest | Placeholder documentation for GetCloudWatchAlarmTemplateRequest |
| GetCloudWatchAlarmTemplateResponse | Placeholder documentation for GetCloudWatchAlarmTemplateResponse |
| GetEventBridgeRuleTemplateGroupRequest | Placeholder documentation for GetEventBridgeRuleTemplateGroupRequest |
| GetEventBridgeRuleTemplateGroupResponse | Placeholder documentation for GetEventBridgeRuleTemplateGroupResponse |
| GetEventBridgeRuleTemplateRequest | Placeholder documentation for GetEventBridgeRuleTemplateRequest |
| GetEventBridgeRuleTemplateResponse | Placeholder documentation for GetEventBridgeRuleTemplateResponse |
| GetSignalMapRequest | Placeholder documentation for GetSignalMapRequest |
| GetSignalMapResponse | Placeholder documentation for GetSignalMapResponse |
| GlobalConfiguration | Global Configuration |
| H264ColorSpaceSettings | H264 Color Space Settings |
| H264FilterSettings | H264 Filter Settings |
| H264Settings | H264 Settings |
| H265ColorSpaceSettings | H265 Color Space Settings |
| H265FilterSettings | H265 Filter Settings |
| H265Settings | H265 Settings |
| Hdr10Settings | Hdr10 Settings |
| HlsAkamaiSettings | Hls Akamai Settings |
| HlsBasicPutSettings | Hls Basic Put Settings |
| HlsCdnSettings | Hls Cdn Settings |
| HlsGroupSettings | Hls Group Settings |
| HlsId3SegmentTaggingScheduleActionSettings | Settings for the action to insert a user-defined ID3 tag in each HLS segment |
| HlsInputSettings | Hls Input Settings |
| HlsMediaStoreSettings | Hls Media Store Settings |
| HlsOutputSettings | Hls Output Settings |
| HlsS3Settings | Hls S3 Settings |
| HlsSettings | Hls Settings |
| HlsTimedMetadataScheduleActionSettings | Settings for the action to emit HLS metadata |
| HlsWebdavSettings | Hls Webdav Settings |
| HtmlMotionGraphicsSettings | Html Motion Graphics Settings |
| ImmediateModeScheduleActionStartSettings | Settings to configure an action so that it occurs as soon as possible. |
| Input | Placeholder documentation for Input |
| InputAttachment | Placeholder documentation for InputAttachment |
| InputChannelLevel | Input Channel Level |
| InputClippingSettings | Settings to let you create a clip of the file input, in order to set up the input to ingest only a portion of the file. |
| InputDestination | The settings for a PUSH type input. |
| InputDestinationRequest | Endpoint settings for a PUSH type input. |
| InputDestinationVpc | The properties for a VPC type input destination. |
| InputDeviceConfigurableAudioChannelPairConfig | One audio configuration that specifies the format for one audio pair that the device produces as output. |
| InputDeviceConfigurableSettings | Configurable settings for the input device. |
| InputDeviceHdSettings | Settings that describe the active source from the input device, and the video characteristics of that source. |
| InputDeviceMediaConnectConfigurableSettings | Parameters required to attach a MediaConnect flow to the device. |
| InputDeviceMediaConnectSettings | Information about the MediaConnect flow attached to the device. |
| InputDeviceNetworkSettings | The network settings for the input device. |
| InputDeviceRequest | Settings for an input device. |
| InputDeviceSettings | Settings for an input device. |
| InputDeviceSummary | Details of the input device. |
| InputDeviceUhdAudioChannelPairConfig | One audio configuration that specifies the format for one audio pair that the device produces as output. |
| InputDeviceUhdSettings | Settings that describe the active source from the input device, and the video characteristics of that source. |
| InputLocation | Input Location |
| InputLossBehavior | Input Loss Behavior |
| InputLossFailoverSettings | MediaLive will perform a failover if content is not detected in this input for the specified period. |
| InputPrepareScheduleActionSettings | Action to prepare an input for a future immediate input switch. |
| InputSecurityGroup | An Input Security Group |
| InputSettings | Live Event input parameters. There can be multiple inputs in a single Live Event. |
| InputSource | The settings for a PULL type input. |
| InputSourceRequest | Settings for for a PULL type input. |
| InputSpecification | Placeholder documentation for InputSpecification |
| InputSwitchScheduleActionSettings | Settings for the "switch input" action: to switch from ingesting one input to ingesting another input. |
| InputVpcRequest | Settings for a private VPC Input. When this property is specified, the input destination addresses will be created in a VPC rather than with public Internet addresses. This property requires setting the roleArn property on Input creation. Not compatible with the inputSecurityGroups property. |
| InputWhitelistRule | Whitelist rule |
| InputWhitelistRuleCidr | An IPv4 CIDR to whitelist. |
| KeyProviderSettings | Key Provider Settings |
| ListChannelsRequest | Placeholder documentation for ListChannelsRequest |
| ListChannelsResponse | Placeholder documentation for ListChannelsResponse |
| ListCloudWatchAlarmTemplateGroupsRequest | Placeholder documentation for ListCloudWatchAlarmTemplateGroupsRequest |
| ListCloudWatchAlarmTemplateGroupsResponse | Placeholder documentation for ListCloudWatchAlarmTemplateGroupsResponse |
| ListCloudWatchAlarmTemplatesRequest | Placeholder documentation for ListCloudWatchAlarmTemplatesRequest |
| ListCloudWatchAlarmTemplatesResponse | Placeholder documentation for ListCloudWatchAlarmTemplatesResponse |
| ListEventBridgeRuleTemplateGroupsRequest | Placeholder documentation for ListEventBridgeRuleTemplateGroupsRequest |
| ListEventBridgeRuleTemplateGroupsResponse | Placeholder documentation for ListEventBridgeRuleTemplateGroupsResponse |
| ListEventBridgeRuleTemplatesRequest | Placeholder documentation for ListEventBridgeRuleTemplatesRequest |
| ListEventBridgeRuleTemplatesResponse | Placeholder documentation for ListEventBridgeRuleTemplatesResponse |
| ListInputDevicesRequest | Placeholder documentation for ListInputDevicesRequest |
| ListInputDevicesResponse | Placeholder documentation for ListInputDevicesResponse |
| ListInputDeviceTransfersRequest | Placeholder documentation for ListInputDeviceTransfersRequest |
| ListInputDeviceTransfersResponse | Placeholder documentation for ListInputDeviceTransfersResponse |
| ListInputSecurityGroupsRequest | Placeholder documentation for ListInputSecurityGroupsRequest |
| ListInputSecurityGroupsResponse | Placeholder documentation for ListInputSecurityGroupsResponse |
| ListInputsRequest | Placeholder documentation for ListInputsRequest |
| ListInputsResponse | Placeholder documentation for ListInputsResponse |
| ListMultiplexesRequest | Placeholder documentation for ListMultiplexesRequest |
| ListMultiplexesResponse | Placeholder documentation for ListMultiplexesResponse |
| ListMultiplexProgramsRequest | Placeholder documentation for ListMultiplexProgramsRequest |
| ListMultiplexProgramsResponse | Placeholder documentation for ListMultiplexProgramsResponse |
| ListOfferingsRequest | Placeholder documentation for ListOfferingsRequest |
| ListOfferingsResponse | Placeholder documentation for ListOfferingsResponse |
| ListReservationsRequest | Placeholder documentation for ListReservationsRequest |
| ListReservationsResponse | Placeholder documentation for ListReservationsResponse |
| ListSignalMapsRequest | Placeholder documentation for ListSignalMapsRequest |
| ListSignalMapsResponse | Placeholder documentation for ListSignalMapsResponse |
| ListTagsForResourceRequest | Placeholder documentation for ListTagsForResourceRequest |
| ListTagsForResourceResponse | Placeholder documentation for ListTagsForResourceResponse |
| M2tsSettings | M2ts Settings |
| M3u8Settings | Settings information for the .m3u8 container |
| MaintenanceCreateSettings | Placeholder documentation for MaintenanceCreateSettings |
| MaintenanceStatus | Placeholder documentation for MaintenanceStatus |
| MaintenanceUpdateSettings | Placeholder documentation for MaintenanceUpdateSettings |
| MediaConnectFlow | The settings for a MediaConnect Flow. |
| MediaConnectFlowRequest | The settings for a MediaConnect Flow. |
| MediaPackageGroupSettings | Media Package Group Settings |
| MediaPackageOutputDestinationSettings | MediaPackage Output Destination Settings |
| MediaPackageOutputSettings | Media Package Output Settings |
| MediaResource | An AWS resource used in media workflows. |
| MediaResourceNeighbor | A direct source or destination neighbor to an AWS media resource. |
| MonitorDeployment | Represents the latest monitor deployment of a signal map. |
| MotionGraphicsActivateScheduleActionSettings | Settings to specify the rendering of motion graphics into the video stream. |
| MotionGraphicsConfiguration | Motion Graphics Configuration |
| MotionGraphicsDeactivateScheduleActionSettings | Settings to specify the ending of rendering motion graphics into the video stream. |
| MotionGraphicsSettings | Motion Graphics Settings |
| Mp2Settings | Mp2 Settings |
| Mpeg2FilterSettings | Mpeg2 Filter Settings |
| Mpeg2Settings | Mpeg2 Settings |
| MsSmoothGroupSettings | Ms Smooth Group Settings |
| MsSmoothOutputSettings | Ms Smooth Output Settings |
| Multiplex | The multiplex object. |
| MultiplexGroupSettings | Multiplex Group Settings |
| MultiplexMediaConnectOutputDestinationSettings | Multiplex MediaConnect output destination settings. |
| MultiplexOutputDestination | Multiplex output destination settings |
| MultiplexOutputSettings | Multiplex Output Settings |
| MultiplexProgram | The multiplex program object. |
| MultiplexProgramChannelDestinationSettings | Multiplex Program Input Destination Settings for outputting a Channel to a Multiplex |
| MultiplexProgramPacketIdentifiersMap | Packet identifiers map for a given Multiplex program. |
| MultiplexProgramPipelineDetail | The current source for one of the pipelines in the multiplex. |
| MultiplexProgramServiceDescriptor | Transport stream service descriptor configuration for the Multiplex program. |
| MultiplexProgramSettings | Multiplex Program settings configuration. |
| MultiplexProgramSummary | Placeholder documentation for MultiplexProgramSummary |
| MultiplexSettings | Contains configuration for a Multiplex event |
| MultiplexSettingsSummary | Contains summary configuration for a Multiplex event. |
| MultiplexStatmuxVideoSettings | Statmux rate control settings |
| MultiplexSummary | Placeholder documentation for MultiplexSummary |
| MultiplexVideoSettings | The video configuration for each program in a multiplex. |
| NetworkInputSettings | Network source to transcode. Must be accessible to the Elemental Live node that is running the live event through a network connection. |
| NielsenCBET | Nielsen CBET |
| NielsenConfiguration | Nielsen Configuration |
| NielsenNaesIiNw | Nielsen Naes Ii Nw |
| NielsenWatermarksSettings | Nielsen Watermarks Settings |
| Offering | Reserved resources available for purchase |
| Output | Output settings. There can be multiple outputs within a group. |
| OutputDestination | Placeholder documentation for OutputDestination |
| OutputDestinationSettings | Placeholder documentation for OutputDestinationSettings |
| OutputGroup | Output groups for this Live Event. Output groups contain information about where streams should be distributed. |
| OutputGroupSettings | Output Group Settings |
| OutputLocationRef | Reference to an OutputDestination ID defined in the channel |
| OutputLockingSettings | Output Locking Settings |
| OutputSettings | Output Settings |
| PassThroughSettings | Pass Through Settings |
| PauseStateScheduleActionSettings | Settings for the action to set pause state of a channel. |
| PipelineDetail | Runtime details of a pipeline when a channel is running. |
| PipelineLockingSettings | Pipeline Locking Settings |
| PipelinePauseStateSettings | Settings for pausing a pipeline. |
| PurchaseOfferingRequest | Placeholder documentation for PurchaseOfferingRequest |
| PurchaseOfferingResponse | Placeholder documentation for PurchaseOfferingResponse |
| RawSettings | Raw Settings |
| RebootInputDeviceRequest | A request to reboot an AWS Elemental device. |
| Rec601Settings | Rec601 Settings |
| Rec709Settings | Rec709 Settings |
| RejectInputDeviceTransferRequest | Placeholder documentation for RejectInputDeviceTransferRequest |
| RemixSettings | Remix Settings |
| RenewalSettings | The Renewal settings for Reservations |
| Reservation | Reserved resources available to use |
| ReservationResourceSpecification | Resource configuration (codec, resolution, bitrate, ...) |
| RestartChannelPipelinesRequest | Pipelines to restart. |
| RestartChannelPipelinesResponse | Placeholder documentation for RestartChannelPipelinesResponse |
| RtmpCaptionInfoDestinationSettings | Rtmp Caption Info Destination Settings |
| RtmpGroupSettings | Rtmp Group Settings |
| RtmpOutputSettings | Rtmp Output Settings |
| ScheduleAction | Contains information on a single schedule action. |
| ScheduleActionSettings | Holds the settings for a single schedule action. |
| ScheduleActionStartSettings | Settings to specify when an action should occur. Only one of the options must be selected. |
| Scte20PlusEmbeddedDestinationSettings | Scte20 Plus Embedded Destination Settings |
| Scte20SourceSettings | Scte20 Source Settings |
| Scte27DestinationSettings | Scte27 Destination Settings |
| Scte27SourceSettings | Scte27 Source Settings |
| Scte35DeliveryRestrictions | Corresponds to SCTE-35 delivery_not_restricted_flag parameter. To declare delivery restrictions, include this element and its four "restriction" flags. To declare that there are no restrictions, omit this element. |
| Scte35Descriptor | Holds one set of SCTE-35 Descriptor Settings. |
| Scte35DescriptorSettings | SCTE-35 Descriptor settings. |
| Scte35InputScheduleActionSettings | Scte35Input Schedule Action Settings |
| Scte35ReturnToNetworkScheduleActionSettings | Settings for a SCTE-35 return_to_network message. |
| Scte35SegmentationDescriptor | Corresponds to SCTE-35 segmentation_descriptor. |
| Scte35SpliceInsert | Typical configuration that applies breaks on splice inserts in addition to time signal placement opportunities, breaks, and advertisements. |
| Scte35SpliceInsertScheduleActionSettings | Settings for a SCTE-35 splice_insert message. |
| Scte35TimeSignalApos | Atypical configuration that applies segment breaks only on SCTE-35 time signal placement opportunities and breaks. |
| Scte35TimeSignalScheduleActionSettings | Settings for a SCTE-35 time_signal. |
| SignalMapSummary | Placeholder documentation for SignalMapSummary |
| SmpteTtDestinationSettings | Smpte Tt Destination Settings |
| SrtCallerDecryption | The decryption settings for the SRT caller source. Present only if the source has decryption enabled. |
| SrtCallerDecryptionRequest | Complete these parameters only if the content is encrypted. |
| SrtCallerSource | The configuration for a source that uses SRT as the connection protocol. In terms of establishing the connection, MediaLive is always caller and the upstream system is always the listener. In terms of transmission of the source content, MediaLive is always the receiver and the upstream system is always the sender. |
| SrtCallerSourceRequest | Configures the connection for a source that uses SRT as the connection protocol. In terms of establishing the connection, MediaLive is always the caller and the upstream system is always the listener. In terms of transmission of the source content, MediaLive is always the receiver and the upstream system is always the sender. |
| SrtSettings | The configured sources for this SRT input. |
| SrtSettingsRequest | Configures the sources for this SRT input. For a single-pipeline input, include one srtCallerSource in the array. For a standard-pipeline input, include two srtCallerSource. |
| StandardHlsSettings | Standard Hls Settings |
| StartChannelRequest | Placeholder documentation for StartChannelRequest |
| StartChannelResponse | Placeholder documentation for StartChannelResponse |
| StartDeleteMonitorDeploymentRequest | Placeholder documentation for StartDeleteMonitorDeploymentRequest |
| StartDeleteMonitorDeploymentResponse | Placeholder documentation for StartDeleteMonitorDeploymentResponse |
| StartInputDeviceMaintenanceWindowRequest | Placeholder documentation for StartInputDeviceMaintenanceWindowRequest |
| StartInputDeviceRequest | Placeholder documentation for StartInputDeviceRequest |
| StartMonitorDeploymentRequest | Placeholder documentation for StartMonitorDeploymentRequest |
| StartMonitorDeploymentResponse | Placeholder documentation for StartMonitorDeploymentResponse |
| StartMultiplexRequest | Placeholder documentation for StartMultiplexRequest |
| StartMultiplexResponse | Placeholder documentation for StartMultiplexResponse |
| StartTimecode | Settings to identify the start of the clip. |
| StartUpdateSignalMapRequest | Placeholder documentation for StartUpdateSignalMapRequest |
| StartUpdateSignalMapResponse | Placeholder documentation for StartUpdateSignalMapResponse |
| StaticImageActivateScheduleActionSettings | Settings for the action to activate a static image. |
| StaticImageDeactivateScheduleActionSettings | Settings for the action to deactivate the image in a specific layer. |
| StaticImageOutputActivateScheduleActionSettings | Settings for the action to activate a static image. |
| StaticImageOutputDeactivateScheduleActionSettings | Settings for the action to deactivate the image in a specific layer. |
| StaticKeySettings | Static Key Settings |
| StopChannelRequest | Placeholder documentation for StopChannelRequest |
| StopChannelResponse | Placeholder documentation for StopChannelResponse |
| StopInputDeviceRequest | Placeholder documentation for StopInputDeviceRequest |
| StopMultiplexRequest | Placeholder documentation for StopMultiplexRequest |
| StopMultiplexResponse | Placeholder documentation for StopMultiplexResponse |
| StopTimecode | Settings to identify the end of the clip. |
| SuccessfulMonitorDeployment | Represents the latest successful monitor deployment of a signal map. |
| TeletextDestinationSettings | Teletext Destination Settings |
| TeletextSourceSettings | Teletext Source Settings |
| TemporalFilterSettings | Temporal Filter Settings |
| Thumbnail | Details of a single thumbnail |
| ThumbnailConfiguration | Thumbnail Configuration |
| ThumbnailDetail | Thumbnail details for one pipeline of a running channel. |
| TimecodeBurninSettings | Timecode Burnin Settings |
| TimecodeConfig | Timecode Config |
| TransferInputDeviceRequest | A request to transfer an input device. |
| TransferringInputDeviceSummary | Details about the input device that is being transferred. |
| TtmlDestinationSettings | Ttml Destination Settings |
| UdpContainerSettings | Udp Container Settings |
| UdpGroupSettings | Udp Group Settings |
| UdpOutputSettings | Udp Output Settings |
| UpdateAccountConfigurationRequest | List of account configuration parameters to update. |
| UpdateAccountConfigurationResponse | Placeholder documentation for UpdateAccountConfigurationResponse |
| UpdateChannelClassRequest | Channel class that the channel should be updated to. |
| UpdateChannelClassResponse | Placeholder documentation for UpdateChannelClassResponse |
| UpdateChannelRequest | A request to update a channel. |
| UpdateChannelResponse | Placeholder documentation for UpdateChannelResponse |
| UpdateCloudWatchAlarmTemplateGroupRequest | Placeholder documentation for UpdateCloudWatchAlarmTemplateGroupRequest |
| UpdateCloudWatchAlarmTemplateGroupResponse | Placeholder documentation for UpdateCloudWatchAlarmTemplateGroupResponse |
| UpdateCloudWatchAlarmTemplateRequest | Placeholder documentation for UpdateCloudWatchAlarmTemplateRequest |
| UpdateCloudWatchAlarmTemplateResponse | Placeholder documentation for UpdateCloudWatchAlarmTemplateResponse |
| UpdateEventBridgeRuleTemplateGroupRequest | Placeholder documentation for UpdateEventBridgeRuleTemplateGroupRequest |
| UpdateEventBridgeRuleTemplateGroupResponse | Placeholder documentation for UpdateEventBridgeRuleTemplateGroupResponse |
| UpdateEventBridgeRuleTemplateRequest | Placeholder documentation for UpdateEventBridgeRuleTemplateRequest |
| UpdateEventBridgeRuleTemplateResponse | Placeholder documentation for UpdateEventBridgeRuleTemplateResponse |
| UpdateInputDeviceRequest | A request to update an input device. |
| UpdateInputDeviceResponse | Placeholder documentation for UpdateInputDeviceResponse |
| UpdateInputRequest | A request to update an input. |
| UpdateInputResponse | Placeholder documentation for UpdateInputResponse |
| UpdateInputSecurityGroupRequest | The request to update some combination of the Input Security Group name and the IPv4 CIDRs the Input Security Group should allow. |
| UpdateInputSecurityGroupResponse | Placeholder documentation for UpdateInputSecurityGroupResponse |
| UpdateMultiplexProgramRequest | A request to update a program in a multiplex. |
| UpdateMultiplexProgramResponse | Placeholder documentation for UpdateMultiplexProgramResponse |
| UpdateMultiplexRequest | A request to update a multiplex. |
| UpdateMultiplexResponse | Placeholder documentation for UpdateMultiplexResponse |
| UpdateReservationRequest | Request to update a reservation |
| UpdateReservationResponse | Placeholder documentation for UpdateReservationResponse |
| VideoBlackFailoverSettings | Placeholder documentation for VideoBlackFailoverSettings |
| VideoCodecSettings | Video Codec Settings |
| VideoDescription | Video settings for this stream. |
| VideoSelector | Specifies a particular video stream within an input source. An input may have only a single video selector. |
| VideoSelectorColorSpaceSettings | Video Selector Color Space Settings |
| VideoSelectorPid | Video Selector Pid |
| VideoSelectorProgramId | Video Selector Program Id |
| VideoSelectorSettings | Video Selector Settings |
| VpcOutputSettings | The properties for a private VPC Output When this property is specified, the output egress addresses will be created in a user specified VPC |
| VpcOutputSettingsDescription | The properties for a private VPC Output |
| WavSettings | Wav Settings |
| WebvttDestinationSettings | Webvtt Destination Settings |
| AacCodingMode | Aac Coding Mode |
| AacInputType | Aac Input Type |
| AacProfile | Aac Profile |
| AacRateControlMode | Aac Rate Control Mode |
| AacRawFormat | Aac Raw Format |
| AacSpec | Aac Spec |
| AacVbrQuality | Aac Vbr Quality |
| Ac3AttenuationControl | Ac3 Attenuation Control |
| Ac3BitstreamMode | Ac3 Bitstream Mode |
| Ac3CodingMode | Ac3 Coding Mode |
| Ac3DrcProfile | Ac3 Drc Profile |
| Ac3LfeFilter | Ac3 Lfe Filter |
| Ac3MetadataControl | Ac3 Metadata Control |
| AcceptHeader | The HTTP Accept header. Indicates the requested type fothe thumbnail. |
| AccessibilityType | Accessibility Type |
| AfdSignaling | Afd Signaling |
| Algorithm | Placeholder documentation for Algorithm |
| AudioDescriptionAudioTypeControl | Audio Description Audio Type Control |
| AudioDescriptionLanguageCodeControl | Audio Description Language Code Control |
| AudioLanguageSelectionPolicy | Audio Language Selection Policy |
| AudioNormalizationAlgorithm | Audio Normalization Algorithm |
| AudioNormalizationAlgorithmControl | Audio Normalization Algorithm Control |
| AudioOnlyHlsSegmentType | Audio Only Hls Segment Type |
| AudioOnlyHlsTrackType | Audio Only Hls Track Type |
| AudioType | Audio Type |
| AuthenticationScheme | Authentication Scheme |
| AvailBlankingState | Avail Blanking State |
| BlackoutSlateNetworkEndBlackout | Blackout Slate Network End Blackout |
| BlackoutSlateState | Blackout Slate State |
| BurnInAlignment | Burn In Alignment |
| BurnInBackgroundColor | Burn In Background Color |
| BurnInFontColor | Burn In Font Color |
| BurnInOutlineColor | Burn In Outline Color |
| BurnInShadowColor | Burn In Shadow Color |
| BurnInTeletextGridControl | Burn In Teletext Grid Control |
| CdiInputResolution | Maximum CDI input resolution; SD is 480i and 576i up to 30 frames-per-second (fps), HD is 720p up to 60 fps / 1080i up to 30 fps, FHD is 1080p up to 60 fps, UHD is 2160p up to 60 fps |
| ChannelClass | A standard channel has two encoding pipelines and a single pipeline channel only has one. |
| ChannelPipelineIdToRestart | Property of RestartChannelPipelinesRequest |
| ChannelState | Placeholder documentation for ChannelState |
| CloudWatchAlarmTemplateComparisonOperator | The comparison operator used to compare the specified statistic and the threshold. |
| CloudWatchAlarmTemplateStatistic | The statistic to apply to the alarm's metric data. |
| CloudWatchAlarmTemplateTargetResourceType | The resource type this template should dynamically generate cloudwatch metric alarms for. |
| CloudWatchAlarmTemplateTreatMissingData | Specifies how missing data points are treated when evaluating the alarm's condition. |
| CmafIngestSegmentLengthUnits | Cmaf Ingest Segment Length Units |
| CmafNielsenId3Behavior | Cmaf Nielsen Id3 Behavior |
| ColorSpace | Property of colorCorrections. When you are using 3D LUT files to perform color conversion on video, these are the supported color spaces. |
| ContentType | Specifies the media type of the thumbnail. |
| DashRoleAudio | Dash Role Audio |
| DashRoleCaption | Dash Role Caption |
| DeviceSettingsSyncState | The status of the action to synchronize the device configuration. If you change the configuration of the input device (for example, the maximum bitrate), MediaLive sends the new data to the device. The device might not update itself immediately. SYNCED means the device has updated its configuration. SYNCING means that it has not updated its configuration. |
| DeviceUpdateStatus | The status of software on the input device. |
| DolbyEProgramSelection | Dolby EProgram Selection |
| DvbDashAccessibility | Dvb Dash Accessibility |
| DvbSdtOutputSdt | Dvb Sdt Output Sdt |
| DvbSubDestinationAlignment | Dvb Sub Destination Alignment |
| DvbSubDestinationBackgroundColor | Dvb Sub Destination Background Color |
| DvbSubDestinationFontColor | Dvb Sub Destination Font Color |
| DvbSubDestinationOutlineColor | Dvb Sub Destination Outline Color |
| DvbSubDestinationShadowColor | Dvb Sub Destination Shadow Color |
| DvbSubDestinationTeletextGridControl | Dvb Sub Destination Teletext Grid Control |
| DvbSubOcrLanguage | Dvb Sub Ocr Language |
| Eac3AtmosCodingMode | Eac3 Atmos Coding Mode |
| Eac3AtmosDrcLine | Eac3 Atmos Drc Line |
| Eac3AtmosDrcRf | Eac3 Atmos Drc Rf |
| Eac3AttenuationControl | Eac3 Attenuation Control |
| Eac3BitstreamMode | Eac3 Bitstream Mode |
| Eac3CodingMode | Eac3 Coding Mode |
| Eac3DcFilter | Eac3 Dc Filter |
| Eac3DrcLine | Eac3 Drc Line |
| Eac3DrcRf | Eac3 Drc Rf |
| Eac3LfeControl | Eac3 Lfe Control |
| Eac3LfeFilter | Eac3 Lfe Filter |
| Eac3MetadataControl | Eac3 Metadata Control |
| Eac3PassthroughControl | Eac3 Passthrough Control |
| Eac3PhaseControl | Eac3 Phase Control |
| Eac3StereoDownmix | Eac3 Stereo Downmix |
| Eac3SurroundExMode | Eac3 Surround Ex Mode |
| Eac3SurroundMode | Eac3 Surround Mode |
| EbuTtDDestinationStyleControl | Ebu Tt DDestination Style Control |
| EbuTtDFillLineGapControl | Ebu Tt DFill Line Gap Control |
| EmbeddedConvert608To708 | Embedded Convert608 To708 |
| EmbeddedScte20Detection | Embedded Scte20 Detection |
| EventBridgeRuleTemplateEventType | The type of event to match with the rule. |
| FeatureActivationsInputPrepareScheduleActions | Feature Activations Input Prepare Schedule Actions |
| FeatureActivationsOutputStaticImageOverlayScheduleActions | Feature Activations Output Static Image Overlay Schedule Actions |
| FecOutputIncludeFec | Fec Output Include Fec |
| FixedAfd | Fixed Afd |
| Fmp4NielsenId3Behavior | Fmp4 Nielsen Id3 Behavior |
| Fmp4TimedMetadataBehavior | Fmp4 Timed Metadata Behavior |
| FollowPoint | Follow reference point. |
| FrameCaptureIntervalUnit | Frame Capture Interval Unit |
| GlobalConfigurationInputEndAction | Global Configuration Input End Action |
| GlobalConfigurationLowFramerateInputs | Global Configuration Low Framerate Inputs |
| GlobalConfigurationOutputLockingMode | Global Configuration Output Locking Mode |
| GlobalConfigurationOutputTimingSource | Global Configuration Output Timing Source |
| H264AdaptiveQuantization | H264 Adaptive Quantization |
| H264ColorMetadata | H264 Color Metadata |
| H264EntropyEncoding | H264 Entropy Encoding |
| H264FlickerAq | H264 Flicker Aq |
| H264ForceFieldPictures | H264 Force Field Pictures |
| H264FramerateControl | H264 Framerate Control |
| H264GopBReference | H264 Gop BReference |
| H264GopSizeUnits | H264 Gop Size Units |
| H264Level | H264 Level |
| H264LookAheadRateControl | H264 Look Ahead Rate Control |
| H264ParControl | H264 Par Control |
| H264Profile | H264 Profile |
| H264QualityLevel | H264 Quality Level |
| H264RateControlMode | H264 Rate Control Mode |
| H264ScanType | H264 Scan Type |
| H264SceneChangeDetect | H264 Scene Change Detect |
| H264SpatialAq | H264 Spatial Aq |
| H264SubGopLength | H264 Sub Gop Length |
| H264Syntax | H264 Syntax |
| H264TemporalAq | H264 Temporal Aq |
| H264TimecodeInsertionBehavior | H264 Timecode Insertion Behavior |
| H265AdaptiveQuantization | H265 Adaptive Quantization |
| H265AlternativeTransferFunction | H265 Alternative Transfer Function |
| H265ColorMetadata | H265 Color Metadata |
| H265FlickerAq | H265 Flicker Aq |
| H265GopSizeUnits | H265 Gop Size Units |
| H265Level | H265 Level |
| H265LookAheadRateControl | H265 Look Ahead Rate Control |
| H265MvOverPictureBoundaries | H265 Mv Over Picture Boundaries |
| H265MvTemporalPredictor | H265 Mv Temporal Predictor |
| H265Profile | H265 Profile |
| H265RateControlMode | H265 Rate Control Mode |
| H265ScanType | H265 Scan Type |
| H265SceneChangeDetect | H265 Scene Change Detect |
| H265Tier | H265 Tier |
| H265TilePadding | H265 Tile Padding |
| H265TimecodeInsertionBehavior | H265 Timecode Insertion Behavior |
| H265TreeblockSize | H265 Treeblock Size |
| HlsAdMarkers | Hls Ad Markers |
| HlsAkamaiHttpTransferMode | Hls Akamai Http Transfer Mode |
| HlsCaptionLanguageSetting | Hls Caption Language Setting |
| HlsClientCache | Hls Client Cache |
| HlsCodecSpecification | Hls Codec Specification |
| HlsDirectoryStructure | Hls Directory Structure |
| HlsDiscontinuityTags | Hls Discontinuity Tags |
| HlsEncryptionType | Hls Encryption Type |
| HlsH265PackagingType | Hls H265 Packaging Type |
| HlsId3SegmentTaggingState | State of HLS ID3 Segment Tagging |
| HlsIncompleteSegmentBehavior | Hls Incomplete Segment Behavior |
| HlsIvInManifest | Hls Iv In Manifest |
| HlsIvSource | Hls Iv Source |
| HlsManifestCompression | Hls Manifest Compression |
| HlsManifestDurationFormat | Hls Manifest Duration Format |
| HlsMediaStoreStorageClass | Hls Media Store Storage Class |
| HlsMode | Hls Mode |
| HlsOutputSelection | Hls Output Selection |
| HlsProgramDateTime | Hls Program Date Time |
| HlsProgramDateTimeClock | Hls Program Date Time Clock |
| HlsRedundantManifest | Hls Redundant Manifest |
| HlsScte35SourceType | Hls Scte35 Source Type |
| HlsSegmentationMode | Hls Segmentation Mode |
| HlsStreamInfResolution | Hls Stream Inf Resolution |
| HlsTimedMetadataId3Frame | Hls Timed Metadata Id3 Frame |
| HlsTsFileMode | Hls Ts File Mode |
| HlsWebdavHttpTransferMode | Hls Webdav Http Transfer Mode |
| IFrameOnlyPlaylistType | When set to "standard", an I-Frame only playlist will be written out for each video output in the output group. This I-Frame only playlist will contain byte range offsets pointing to the I-frame(s) in each segment. |
| IncludeFillerNalUnits | Include Filler Nal Units |
| InputClass | A standard input has two sources and a single pipeline input only has one. |
| InputCodec | codec in increasing order of complexity |
| InputDeblockFilter | Input Deblock Filter |
| InputDenoiseFilter | Input Denoise Filter |
| InputDeviceActiveInput | The source at the input device that is currently active. |
| InputDeviceCodec | The codec to use on the video that the device produces. |
| InputDeviceConfigurableAudioChannelPairProfile | Property of InputDeviceConfigurableAudioChannelPairConfig, which configures one audio channel that the device produces. |
| InputDeviceConfiguredInput | The source to activate (use) from the input device. |
| InputDeviceConnectionState | The state of the connection between the input device and AWS. |
| InputDeviceIpScheme | Specifies whether the input device has been configured (outside of MediaLive) to use a dynamic IP address assignment (DHCP) or a static IP address. |
| InputDeviceOutputType | The output attachment type of the input device. |
| InputDeviceScanType | The scan type of the video source. |
| InputDeviceState | The state of the input device. |
| InputDeviceTransferType | The type of device transfer. INCOMING for an input device that is being transferred to you, OUTGOING for an input device that you are transferring to another AWS account. |
| InputDeviceType | The type of the input device. For an AWS Elemental Link device that outputs resolutions up to 1080, choose "HD". |
| InputDeviceUhdAudioChannelPairProfile | Property of InputDeviceUhdAudioChannelPairConfig, which describes one audio channel that the device is configured to produce. |
| InputFilter | Input Filter |
| InputLossActionForHlsOut | Input Loss Action For Hls Out |
| InputLossActionForMsSmoothOut | Input Loss Action For Ms Smooth Out |
| InputLossActionForRtmpOut | Input Loss Action For Rtmp Out |
| InputLossActionForUdpOut | Input Loss Action For Udp Out |
| InputLossImageType | Input Loss Image Type |
| InputMaximumBitrate | Maximum input bitrate in megabits per second. Bitrates up to 50 Mbps are supported currently. |
| InputPreference | Input preference when deciding which input to make active when a previously failed input has recovered. If "EQUAL_INPUT_PREFERENCE", then the active input will stay active as long as it is healthy. If "PRIMARY_INPUT_PREFERRED", then always switch back to the primary input when it is healthy. |
| InputResolution | Input resolution based on lines of vertical resolution in the input; SD is less than 720 lines, HD is 720 to 1080 lines, UHD is greater than 1080 lines |
| InputSecurityGroupState | Placeholder documentation for InputSecurityGroupState |
| InputSourceEndBehavior | Input Source End Behavior |
| InputSourceType | There are two types of input sources, static and dynamic. If an input source is dynamic you can change the source url of the input dynamically using an input switch action. Currently, two input types support a dynamic url at this time, MP4_FILE and TS_FILE. By default all input sources are static. |
| InputState | Placeholder documentation for InputState |
| InputTimecodeSource | Documentation update needed |
| InputType | The different types of inputs that AWS Elemental MediaLive supports. |
| LastFrameClippingBehavior | If you specify a StopTimecode in an input (in order to clip the file), you can specify if you want the clip to exclude (the default) or include the frame specified by the timecode. |
| LogLevel | The log level the user wants for their channel. |
| M2tsAbsentInputAudioBehavior | M2ts Absent Input Audio Behavior |
| M2tsArib | M2ts Arib |
| M2tsAribCaptionsPidControl | M2ts Arib Captions Pid Control |
| M2tsAudioBufferModel | M2ts Audio Buffer Model |
| M2tsAudioInterval | M2ts Audio Interval |
| M2tsAudioStreamType | M2ts Audio Stream Type |
| M2tsBufferModel | M2ts Buffer Model |
| M2tsCcDescriptor | M2ts Cc Descriptor |
| M2tsEbifControl | M2ts Ebif Control |
| M2tsEbpPlacement | M2ts Ebp Placement |
| M2tsEsRateInPes | M2ts Es Rate In Pes |
| M2tsKlv | M2ts Klv |
| M2tsNielsenId3Behavior | M2ts Nielsen Id3 Behavior |
| M2tsPcrControl | M2ts Pcr Control |
| M2tsRateMode | M2ts Rate Mode |
| M2tsScte35Control | M2ts Scte35 Control |
| M2tsSegmentationMarkers | M2ts Segmentation Markers |
| M2tsSegmentationStyle | M2ts Segmentation Style |
| M2tsTimedMetadataBehavior | M2ts Timed Metadata Behavior |
| M3u8KlvBehavior | M3u8 Klv Behavior |
| M3u8NielsenId3Behavior | M3u8 Nielsen Id3 Behavior |
| M3u8PcrControl | M3u8 Pcr Control |
| M3u8Scte35Behavior | M3u8 Scte35 Behavior |
| M3u8TimedMetadataBehavior | M3u8 Timed Metadata Behavior |
| MaintenanceDay | The currently selected maintenance day. |
| MotionGraphicsInsertion | Motion Graphics Insertion |
| Mp2CodingMode | Mp2 Coding Mode |
| Mpeg2AdaptiveQuantization | Mpeg2 Adaptive Quantization |
| Mpeg2ColorMetadata | Mpeg2 Color Metadata |
| Mpeg2ColorSpace | Mpeg2 Color Space |
| Mpeg2DisplayRatio | Mpeg2 Display Ratio |
| Mpeg2GopSizeUnits | Mpeg2 Gop Size Units |
| Mpeg2ScanType | Mpeg2 Scan Type |
| Mpeg2SubGopLength | Mpeg2 Sub Gop Length |
| Mpeg2TimecodeInsertionBehavior | Mpeg2 Timecode Insertion Behavior |
| MsSmoothH265PackagingType | Ms Smooth H265 Packaging Type |
| MultiplexState | The current state of the multiplex. |
| NetworkInputServerValidation | Network Input Server Validation |
| NielsenPcmToId3TaggingState | State of Nielsen PCM to ID3 tagging |
| NielsenWatermarksCbetStepaside | Nielsen Watermarks Cbet Stepaside |
| NielsenWatermarksDistributionTypes | Nielsen Watermarks Distribution Types |
| NielsenWatermarkTimezones | Nielsen Watermark Timezones |
| OfferingDurationUnits | Units for duration, e.g. 'MONTHS' |
| OfferingType | Offering type, e.g. 'NO_UPFRONT' |
| PipelineId | Pipeline ID |
| PreferredChannelPipeline | Indicates which pipeline is preferred by the multiplex for program ingest. If set to "PIPELINE_0" or "PIPELINE_1" and an unhealthy ingest causes the multiplex to switch to the non-preferred pipeline, it will switch back once that ingest is healthy again. If set to "CURRENTLY_ACTIVE", it will not switch back to the other pipeline based on it recovering to a healthy state, it will only switch if the active pipeline becomes unhealthy. |
| RebootInputDeviceForce | Whether or not to force reboot the input device. |
| ReservationAutomaticRenewal | Automatic Renewal Status for Reservation |
| ReservationCodec | Codec, 'MPEG2', 'AVC', 'HEVC', or 'AUDIO' |
| ReservationMaximumBitrate | Maximum bitrate in megabits per second |
| ReservationMaximumFramerate | Maximum framerate in frames per second (Outputs only) |
| ReservationResolution | Resolution based on lines of vertical resolution; SD is less than 720 lines, HD is 720 to 1080 lines, FHD is 1080 lines, UHD is greater than 1080 lines |
| ReservationResourceType | Resource type, 'INPUT', 'OUTPUT', 'MULTIPLEX', or 'CHANNEL' |
| ReservationSpecialFeature | Special features, 'ADVANCED_AUDIO' 'AUDIO_NORMALIZATION' 'MGHD' or 'MGUHD' |
| ReservationState | Current reservation state |
| ReservationVideoQuality | Video quality, e.g. 'STANDARD' (Outputs only) |
| RtmpAdMarkers | Rtmp Ad Markers |
| RtmpCacheFullBehavior | Rtmp Cache Full Behavior |
| RtmpCaptionData | Rtmp Caption Data |
| RtmpOutputCertificateMode | Rtmp Output Certificate Mode |
| S3CannedAcl | S3 Canned Acl |
| Scte20Convert608To708 | Scte20 Convert608 To708 |
| Scte27OcrLanguage | Scte27 Ocr Language |
| Scte35AposNoRegionalBlackoutBehavior | Scte35 Apos No Regional Blackout Behavior |
| Scte35AposWebDeliveryAllowedBehavior | Scte35 Apos Web Delivery Allowed Behavior |
| Scte35ArchiveAllowedFlag | Corresponds to the archive_allowed parameter. A value of ARCHIVE_NOT_ALLOWED corresponds to 0 (false) in the SCTE-35 specification. If you include one of the "restriction" flags then you must include all four of them. |
| Scte35DeviceRestrictions | Corresponds to the device_restrictions parameter in a segmentation_descriptor. If you include one of the "restriction" flags then you must include all four of them. |
| Scte35InputMode | Whether the SCTE-35 input should be the active input or a fixed input. |
| Scte35NoRegionalBlackoutFlag | Corresponds to the no_regional_blackout_flag parameter. A value of REGIONAL_BLACKOUT corresponds to 0 (false) in the SCTE-35 specification. If you include one of the "restriction" flags then you must include all four of them. |
| Scte35SegmentationCancelIndicator | Corresponds to SCTE-35 segmentation_event_cancel_indicator. SEGMENTATION_EVENT_NOT_CANCELED corresponds to 0 in the SCTE-35 specification and indicates that this is an insertion request. SEGMENTATION_EVENT_CANCELED corresponds to 1 in the SCTE-35 specification and indicates that this is a cancelation request, in which case complete this field and the existing event ID to cancel. |
| Scte35SegmentationScope | Scte35 Segmentation Scope |
| Scte35SpliceInsertNoRegionalBlackoutBehavior | Scte35 Splice Insert No Regional Blackout Behavior |
| Scte35SpliceInsertWebDeliveryAllowedBehavior | Scte35 Splice Insert Web Delivery Allowed Behavior |
| Scte35Type | Scte35 Type |
| Scte35WebDeliveryAllowedFlag | Corresponds to the web_delivery_allowed_flag parameter. A value of WEB_DELIVERY_NOT_ALLOWED corresponds to 0 (false) in the SCTE-35 specification. If you include one of the "restriction" flags then you must include all four of them. |
| SignalMapMonitorDeploymentStatus | A signal map's monitor deployment status. |
| SignalMapStatus | A signal map's current status which is dependent on its lifecycle actions or associated jobs. |
| SmoothGroupAudioOnlyTimecodeControl | Smooth Group Audio Only Timecode Control |
| SmoothGroupCertificateMode | Smooth Group Certificate Mode |
| SmoothGroupEventIdMode | Smooth Group Event Id Mode |
| SmoothGroupEventStopBehavior | Smooth Group Event Stop Behavior |
| SmoothGroupSegmentationMode | Smooth Group Segmentation Mode |
| SmoothGroupSparseTrackType | Smooth Group Sparse Track Type |
| SmoothGroupStreamManifestBehavior | Smooth Group Stream Manifest Behavior |
| SmoothGroupTimestampOffsetMode | Smooth Group Timestamp Offset Mode |
| Smpte2038DataPreference | Smpte2038 Data Preference |
| TemporalFilterPostFilterSharpening | Temporal Filter Post Filter Sharpening |
| TemporalFilterStrength | Temporal Filter Strength |
| ThumbnailState | Thumbnail State |
| ThumbnailType | Thumbnail type. |
| TimecodeBurninFontSize | Timecode Burnin Font Size |
| TimecodeBurninPosition | Timecode Burnin Position |
| TimecodeConfigSource | Timecode Config Source |
| TtmlDestinationStyleControl | Ttml Destination Style Control |
| UdpTimedMetadataId3Frame | Udp Timed Metadata Id3 Frame |
| VideoDescriptionRespondToAfd | Video Description Respond To Afd |
| VideoDescriptionScalingBehavior | Video Description Scaling Behavior |
| VideoSelectorColorSpace | Video Selector Color Space |
| VideoSelectorColorSpaceUsage | Video Selector Color Space Usage |
| WavCodingMode | Wav Coding Mode |
| WebvttDestinationStyleControl | Webvtt Destination Style Control |