ABP device object for LoRaWAN specification v1.0.x

ABP device object for LoRaWAN specification v1.1

The accuracy of the estimated position in meters. An empty value indicates that no position data is available. A value of ‘0.0’ value indicates that position data is available. This data corresponds to the position information that you specified instead of the position computed by solver.

LoRaWAN application configuration, which can be used to perform geolocation.

Beaconing parameters for configuring the wireless gateways.

CDMA local ID information, which corresponds to the local identification parameters of a CDMA cell.

CDMA object for network measurement reports.

CDMA (Code-division multiple access) object.

The cell towers that were used to perform the measurements.

List of sidewalk certificates.

Connection status event configuration object for enabling or disabling topic.

Connection status resource type event configuration object for enabling or disabling topic.

The device attestation key (DAK) information.

Describes a destination.

Describes a device profile.

Device registration state event configuration object for enabling and disabling relevant topics.

Device registration state resource type event configuration object for enabling or disabling topic.

The required list of dimensions for the metric.

The message in the downlink queue.

Event configuration object for a single resource.

Object of all event configurations and the status of the event topics.

List of FPort assigned for different LoRaWAN application packages to use

A FUOTA task.

Gateway list item object that specifies the frequency and list of gateways for which the downlink message should be sent.

Global identity information.

Global navigation satellite system (GNSS) object used for positioning.

GSM local ID information, which corresponds to the local identification parameters of a GSM cell.

GSM object for network measurement reports.

GSM object.

Information about a Sidewalk device that has been added to an import task.

Information about a wireless device that has been added to an import task.

IP address used for resolving device location.

Join event configuration object for enabling or disabling topic.

Join resource type event configuration object for enabling or disabling topic.

Object for LoRaWAN connection status resource type event configuration.

Object for LoRaWAN connection status resource type event configuration.

LoRaWAN object for create functions.

LoRaWAN device metatdata.

LoRaWANDeviceProfile object.

The LoRaWAN information used with a FUOTA task.

The LoRaWAN information returned from getting a FUOTA task.

LoRaWANGateway object.

LoRaWANGatewayCurrentVersion object.

LoRaWAN gateway metatdata.

LoRaWANGatewayVersion object.

LoRaWANGetServiceProfileInfo object.

Object for LoRaWAN join resource type event configuration.

Object for LoRaWAN join resource type event configuration.

LoRaWAN object for list functions.

The LoRaWAN information that is to be used with the multicast group.

The LoRaWAN information that is to be returned from getting multicast group information.

The metadata information of the LoRaWAN multicast group.

The LoRaWAN information used with the multicast session.

LoRaWAN public gateway metadata.

LoRaWAN router info.

LoRaWANServiceProfile object.

The LoRaWAN information used to start a FUOTA task.

LoRaWAN object for update functions.

LoRaWANUpdateGatewayTaskCreate object.

LoRaWANUpdateGatewayTaskEntry object.

LTE local identification (local ID) information.

LTE object for network measurement reports.

LTE object.

Message delivery status event configuration object for enabling and disabling relevant topics.

Message delivery status resource type event configuration object for enabling or disabling relevant topic.

The aggregated values of the metric.

A multicast group.

A multicast group that is associated with a FUOTA task.

Wireless metadata that is to be sent to multicast group.

Network analyzer configurations.

OTAA device object for v1.0.x

OTAA device object for v1.1

Specify the list of gateways to which you want to send downlink data traffic when the wireless device is running in class B or class C mode.

The wrapper for a position configuration.

The FPorts for the position information.

The wrapper for position solver configurations.

The wrapper for position solver details.

Proximity event configuration object for enabling and disabling relevant topics.

Proximity resource type event configuration object for enabling or disabling topic.

Information about the Semtech GNSS solver configuration.

Details of the Semtech GNSS solver object.

Information about a service profile.

Session keys for ABP v1.1

Session keys for ABP v1.1

Information about a Sidewalk account.

Information about a Sidewalk account.

Sidewalk object for creating a device profile.

Sidewalk object for creating a wireless device.

Sidewalk device object.

MetaData for Sidewalk device.

SidewalkEventNotificationConfigurations object, which is the event configuration object for Sidewalk-related event topics.

Gets information about a Sidewalk device profile.

Sidewalk-related information for devices in an import task that are being onboarded.

Sidewalk object used by list functions.

Sidewalk resource type event configuration object for enabling or disabling topic.

Information about a Sidewalk router.

Information about an import task created for an individual Sidewalk device.

Information about an import task created for bulk provisioning.

Sidewalk update.

Sidewalk object information for updating an import task.

The configuration of summary metrics.

The summary metric query object.

The result of the summary metrics aggregation operation.

A simple label consisting of a customer-defined key-value pair

TD-SCDMA local identification (local Id) information.

TD-SCDMA object for network measurement reports.

TD-SCDMA object.

Trace content for your wireless devices, gateways, and multicast groups.

ABP device object for LoRaWAN specification v1.0.x

ABP device object for LoRaWAN specification v1.1

Object for updating the FPorts information.

UpdateWirelessGatewayTaskCreate object.

UpdateWirelessGatewayTaskEntry object.

WCDMA local identification (local ID) information.

Network Measurement Reports.

WCDMA.

Wi-Fi access point.

The log options for a wireless device event and can be used to set log levels for a specific wireless device event.

Information about an import task for wireless devices.

The log options for wireless devices and can be used to set log levels for a specific type of wireless device.

Information about a wireless device's operation.

The log options for a wireless gateway event and can be used to set log levels for a specific wireless gateway event.

The log options for wireless gateways and can be used to set log levels for a specific type of wireless gateway.

Information about a wireless gateway's operation.

WirelessMetadata object.

Sidewalk device battery level.

Device state defines the device status of sidewalk device.

DlClass for LoRaWAM, valid values are ClassB and ClassC.

Sidewalk device status notification.

The status of a wireless device in a FUOTA task.

The status of a FUOTA task.

The log level for a log message. The log levels can be disabled, or set to ERROR to display less verbose logs containing only error information, or to INFO for more detailed logs.

Sidewalk device message type. Default value is CUSTOM_COMMAND_ID_NOTIFY.

FrameInfo of your multicast group resources for the trace content. Use FrameInfo to debug the multicast communication between your multicast groups and the network server.

The certificate chain algorithm provided by sidewalk.

Supported RfRegions

The event for a log message, if the log message is tied to a wireless device.

FrameInfo of your wireless device resources for the trace content. Use FrameInfo to debug the communication between your LoRaWAN end devices and the network server.

The event for a log message, if the log message is tied to a wireless gateway.

The wireless gateway type.