WireGroupEndpointInterconnect

import type { WireGroupEndpointInterconnect } from "https://googleapis.deno.dev/v1/compute:v1.ts";

The redundant Interconnect connections for this endpoint.

interface WireGroupEndpointInterconnect {

interconnect?: string;

vlanTags?: number[];

}

§Properties

interconnect?: string

[src]

Required. An Interconnect connection. You can specify the connection as a partial or full URL. If the connection is in a different project from the cross-site network, use a format that specifies the project. See the following examples of partial and full URLs: global/interconnects/NAME projects/PROJECT_ID/global/interconnects/NAME - https://compute.googleapis.com/compute/projects/PROJECT_ID/global/interconnects/NAME

vlanTags?: number[]

[src]

Required. To configure the wire group for VLAN mode, enter a VLAN tag, which is a number from 2 to 4093. You can autoallocate a tag by entering 0. To configure the wire group for port mode, enter -1. Review the following guidelines: - A VLAN tag must be unique for an Interconnect connection across all attachments and wire groups. - Both endpoints of a wire must use the same VLAN tag value. - Single wire and redundant type wire groups must have only one VLAN tag. - Port mode pseudowires must have a single VLAN tag with a value of -1 for both endpoints. - Box and cross type wire groups must have two VLAN tags. The first is for the same-zone pseudowire, and the second is for the cross-zone pseudowire.