UpdateSiteRackPhysicalPropertiesInput

import type { UpdateSiteRackPhysicalPropertiesInput } from "https://aws-api.deno.dev/v0.3/services/outposts.ts?docs=full";

interface UpdateSiteRackPhysicalPropertiesInput {

FiberOpticCableType?: FiberOpticCableType | null;

MaximumSupportedWeightLbs?: MaximumSupportedWeightLbs | null;

OpticalStandard?: OpticalStandard | null;

PowerConnector?: PowerConnector | null;

PowerDrawKva?: PowerDrawKva | null;

PowerFeedDrop?: PowerFeedDrop | null;

PowerPhase?: PowerPhase | null;

SiteId: string;

UplinkCount?: UplinkCount | null;

UplinkGbps?: UplinkGbps | null;

}

§Properties

FiberOpticCableType?: FiberOpticCableType | null

[src]

Specify the type of fiber that you will use to attach the Outpost to your network.

MaximumSupportedWeightLbs?: MaximumSupportedWeightLbs | null

[src]

Specify the maximum rack weight that this site can support. NO_LIMIT is over 2000lbs.

OpticalStandard?: OpticalStandard | null

[src]

Specify the type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

OPTIC_10GBASE_SR: 10GBASE-SR
OPTIC_10GBASE_IR: 10GBASE-IR
OPTIC_10GBASE_LR: 10GBASE-LR
OPTIC_40GBASE_SR: 40GBASE-SR
OPTIC_40GBASE_ESR: 40GBASE-ESR
OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)
OPTIC_40GBASE_LR4: 40GBASE-LR4
OPTIC_100GBASE_SR4: 100GBASE-SR4
OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4
OPTIC_100GBASE_LR4: 100GBASE-LR4
OPTIC_100G_PSM4_MSA: 100G PSM4 MSA
OPTIC_1000BASE_LX: 1000Base-LX
OPTIC_1000BASE_SX : 1000Base-SX

PowerConnector?: PowerConnector | null

[src]

Specify the power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

Single-phase AC feed
- L6-30P – (common in US); 30A; single phase
- IEC309 (blue) – P+N+E, 6hr; 32 A; single phase
Three-phase AC feed
- AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase
- AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

PowerDrawKva?: PowerDrawKva | null

[src]

Specify in kVA the power draw available at the hardware placement position for the rack.

PowerFeedDrop?: PowerFeedDrop | null

[src]

Specify whether the power feed comes above or below the rack.

PowerPhase?: PowerPhase | null

[src]

Specify the power option that you can provide for hardware.

Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz
Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

SiteId: string

[src]

The ID or the Amazon Resource Name (ARN) of the site.

UplinkCount?: UplinkCount | null

[src]

Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

1Gbps - Uplinks available: 1, 2, 4, 6, 8
10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16
40 and 100 Gbps- Uplinks available: 1, 2, 4

UplinkGbps?: UplinkGbps | null

[src]

Specify the uplink speed the rack should support for the connection to the Region.