CreateNetworkAclEntryRequest
import type { CreateNetworkAclEntryRequest } from "https://aws-api.deno.dev/v0.3/services/ec2.ts?docs=full";
§Properties
The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24
).
We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18
, we modify it to 100.68.0.0/18
.
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response.
If you have the required permissions, the error response is DryRunOperation
.
Otherwise, it is UnauthorizedOperation
.
Indicates whether this is an egress rule (rule is applied to traffic leaving the subnet).
ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.
The IPv6 network range to allow or deny, in CIDR notation (for example 2001:db8:1234:1a00::/64
).
The protocol number. A value of "-1" means all protocols. If you specify "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), traffic on all ports is allowed, regardless of any ports or ICMP types or codes that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless of any that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv6 CIDR block, you must specify an ICMP type and code.
Indicates whether to allow or deny the traffic that matches the rule.