VerifiedPermissions

import { VerifiedPermissions } from "https://aws-api-bqtgftz736ft.deno.dev/v0.5/services/verifiedpermissions.ts?docs=full";

class VerifiedPermissions {

constructor(apiFactory: client.ApiFactory);

async batchIsAuthorized(params: BatchIsAuthorizedInput, opts?: client.RequestOptions): Promise<BatchIsAuthorizedOutput>;

async batchIsAuthorizedWithToken(params: BatchIsAuthorizedWithTokenInput, opts?: client.RequestOptions): Promise<BatchIsAuthorizedWithTokenOutput>;

async createIdentitySource(params: CreateIdentitySourceInput, opts?: client.RequestOptions): Promise<CreateIdentitySourceOutput>;

async createPolicy(params: CreatePolicyInput, opts?: client.RequestOptions): Promise<CreatePolicyOutput>;

async createPolicyStore(params: CreatePolicyStoreInput, opts?: client.RequestOptions): Promise<CreatePolicyStoreOutput>;

async createPolicyTemplate(params: CreatePolicyTemplateInput, opts?: client.RequestOptions): Promise<CreatePolicyTemplateOutput>;

async deleteIdentitySource(params: DeleteIdentitySourceInput, opts?: client.RequestOptions): Promise<void>;

async deletePolicy(params: DeletePolicyInput, opts?: client.RequestOptions): Promise<void>;

async deletePolicyStore(params: DeletePolicyStoreInput, opts?: client.RequestOptions): Promise<void>;

async deletePolicyTemplate(params: DeletePolicyTemplateInput, opts?: client.RequestOptions): Promise<void>;

async getIdentitySource(params: GetIdentitySourceInput, opts?: client.RequestOptions): Promise<GetIdentitySourceOutput>;

async getPolicy(params: GetPolicyInput, opts?: client.RequestOptions): Promise<GetPolicyOutput>;

async getPolicyStore(params: GetPolicyStoreInput, opts?: client.RequestOptions): Promise<GetPolicyStoreOutput>;

async getPolicyTemplate(params: GetPolicyTemplateInput, opts?: client.RequestOptions): Promise<GetPolicyTemplateOutput>;

async getSchema(params: GetSchemaInput, opts?: client.RequestOptions): Promise<GetSchemaOutput>;

async isAuthorized(params: IsAuthorizedInput, opts?: client.RequestOptions): Promise<IsAuthorizedOutput>;

async isAuthorizedWithToken(params: IsAuthorizedWithTokenInput, opts?: client.RequestOptions): Promise<IsAuthorizedWithTokenOutput>;

async listIdentitySources(params: ListIdentitySourcesInput, opts?: client.RequestOptions): Promise<ListIdentitySourcesOutput>;

async listPolicies(params: ListPoliciesInput, opts?: client.RequestOptions): Promise<ListPoliciesOutput>;

async listPolicyStores(params?: ListPolicyStoresInput, opts?: client.RequestOptions): Promise<ListPolicyStoresOutput>;

async listPolicyTemplates(params: ListPolicyTemplatesInput, opts?: client.RequestOptions): Promise<ListPolicyTemplatesOutput>;

async putSchema(params: PutSchemaInput, opts?: client.RequestOptions): Promise<PutSchemaOutput>;

async updateIdentitySource(params: UpdateIdentitySourceInput, opts?: client.RequestOptions): Promise<UpdateIdentitySourceOutput>;

async updatePolicy(params: UpdatePolicyInput, opts?: client.RequestOptions): Promise<UpdatePolicyOutput>;

async updatePolicyStore(params: UpdatePolicyStoreInput, opts?: client.RequestOptions): Promise<UpdatePolicyStoreOutput>;

async updatePolicyTemplate(params: UpdatePolicyTemplateInput, opts?: client.RequestOptions): Promise<UpdatePolicyTemplateOutput>;

static ApiMetadata: client.ApiMetadata;

}

§Constructors

new VerifiedPermissions(apiFactory: client.ApiFactory)

[src]

§Methods

batchIsAuthorized(params: BatchIsAuthorizedInput, opts?: client.RequestOptions): Promise<BatchIsAuthorizedOutput>

[src]

Makes a series of decisions about multiple authorization requests for one principal or resource. Each request contains the equivalent content of an IsAuthorized request: principal, action, resource, and context. Either the principal or the resource parameter must be identical across all requests. For example, Verified Permissions won't evaluate a pair of requests where bob views photo1 and alice views photo2. Authorization of bob to view photo1 and photo2, or bob and alice to view photo1, are valid batches.

The request is evaluated against all policies in the specified policy store that match the entities that you declare. The result of the decisions is a series of Allow or Deny responses, along with the IDs of the policies that produced each decision.

The entities of a BatchIsAuthorized API request can contain up to 100 principals and up to 100 resources. The requests of a BatchIsAuthorized API request can contain up to 30 requests.

Note: The BatchIsAuthorized operation doesn't have its own IAM permission. To authorize this operation for Amazon Web Services principals, include the permission verifiedpermissions:IsAuthorized in their IAM policies.

batchIsAuthorizedWithToken(params: BatchIsAuthorizedWithTokenInput, opts?: client.RequestOptions): Promise<BatchIsAuthorizedWithTokenOutput>

[src]

Makes a series of decisions about multiple authorization requests for one token. The principal in this request comes from an external identity source in the form of an identity or access token, formatted as a JSON web token (JWT). The information in the parameters can also define additional context that Verified Permissions can include in the evaluations.

The request is evaluated against all policies in the specified policy store that match the entities that you provide in the entities declaration and in the token. The result of the decisions is a series of Allow or Deny responses, along with the IDs of the policies that produced each decision.

The entities of a BatchIsAuthorizedWithToken API request can contain up to 100 resources and up to 99 user groups. The requests of a BatchIsAuthorizedWithToken API request can contain up to 30 requests.

Note: The BatchIsAuthorizedWithToken operation doesn't have its own IAM permission. To authorize this operation for Amazon Web Services principals, include the permission verifiedpermissions:IsAuthorizedWithToken in their IAM policies.

createIdentitySource(params: CreateIdentitySourceInput, opts?: client.RequestOptions): Promise<CreateIdentitySourceOutput>

[src]

Adds an identity source to a policy store–an Amazon Cognito user pool or OpenID Connect (OIDC) identity provider (IdP).

After you create an identity source, you can use the identities provided by the IdP as proxies for the principal in authorization queries that use the IsAuthorizedWithToken or BatchIsAuthorizedWithToken API operations. These identities take the form of tokens that contain claims about the user, such as IDs, attributes and group memberships. Identity sources provide identity (ID) tokens and access tokens. Verified Permissions derives information about your user and session from token claims. Access tokens provide action context to your policies, and ID tokens provide principal Attributes.

! IMPORTANT: ! Tokens from an identity source user continue to be usable until they expire. ! Token revocation and resource deletion have no effect on the validity of a token in your policy store

Note: To reference a user from this identity source in your Cedar policies, refer to the following syntax examples. - Amazon Cognito user pool: Namespace::[Entity type]::[User pool ID]|[user principal attribute], for example MyCorp::User::us-east-1_EXAMPLE|a1b2c3d4-5678-90ab-cdef-EXAMPLE11111. - OpenID Connect (OIDC) provider: Namespace::[Entity type]::[principalIdClaim]|[user principal attribute], for example MyCorp::User::MyOIDCProvider|a1b2c3d4-5678-90ab-cdef-EXAMPLE22222.

Note: Verified Permissions is eventually consistent. It can take a few seconds for a new or changed element to propagate through the service and be visible in the results of other Verified Permissions operations.

createPolicy(params: CreatePolicyInput, opts?: client.RequestOptions): Promise<CreatePolicyOutput>

[src]

Creates a Cedar policy and saves it in the specified policy store. You can create either a static policy or a policy linked to a policy template.

To create a static policy, provide the Cedar policy text in the StaticPolicy section of the PolicyDefinition.
To create a policy that is dynamically linked to a policy template, specify the policy template ID and the principal and resource to associate with this policy in the templateLinked section of the PolicyDefinition. If the policy template is ever updated, any policies linked to the policy template automatically use the updated template.

Note: Creating a policy causes it to be validated against the schema in the policy store. If the policy doesn't pass validation, the operation fails and the policy isn't stored.

createPolicyStore(params: CreatePolicyStoreInput, opts?: client.RequestOptions): Promise<CreatePolicyStoreOutput>

[src]

Creates a policy store. A policy store is a container for policy resources.

Note: Although Cedar supports multiple namespaces, Verified Permissions currently supports only one namespace per policy store.

createPolicyTemplate(params: CreatePolicyTemplateInput, opts?: client.RequestOptions): Promise<CreatePolicyTemplateOutput>

[src]

Creates a policy template. A template can use placeholders for the principal and resource. A template must be instantiated into a policy by associating it with specific principals and resources to use for the placeholders. That instantiated policy can then be considered in authorization decisions. The instantiated policy works identically to any other policy, except that it is dynamically linked to the template. If the template changes, then any policies that are linked to that template are immediately updated as well.

deleteIdentitySource(params: DeleteIdentitySourceInput, opts?: client.RequestOptions): Promise<void>

[src]

Deletes an identity source that references an identity provider (IdP) such as Amazon Cognito. After you delete the identity source, you can no longer use tokens for identities from that identity source to represent principals in authorization queries made using IsAuthorizedWithToken. operations.

deletePolicy(params: DeletePolicyInput, opts?: client.RequestOptions): Promise<void>

[src]

Deletes the specified policy from the policy store.

This operation is idempotent; if you specify a policy that doesn't exist, the request response returns a successful HTTP 200 status code.

deletePolicyStore(params: DeletePolicyStoreInput, opts?: client.RequestOptions): Promise<void>

[src]

Deletes the specified policy store.

This operation is idempotent. If you specify a policy store that does not exist, the request response will still return a successful HTTP 200 status code.

deletePolicyTemplate(params: DeletePolicyTemplateInput, opts?: client.RequestOptions): Promise<void>

[src]

Deletes the specified policy template from the policy store.

! IMPORTANT: ! This operation also deletes any policies that were created from the specified policy template. ! Those policies are immediately removed from all future API responses, and are asynchronously deleted from the policy store.

getIdentitySource(params: GetIdentitySourceInput, opts?: client.RequestOptions): Promise<GetIdentitySourceOutput>

[src]

Retrieves the details about the specified identity source.

getPolicy(params: GetPolicyInput, opts?: client.RequestOptions): Promise<GetPolicyOutput>

[src]

Retrieves information about the specified policy.

getPolicyStore(params: GetPolicyStoreInput, opts?: client.RequestOptions): Promise<GetPolicyStoreOutput>

[src]

Retrieves details about a policy store.

getPolicyTemplate(params: GetPolicyTemplateInput, opts?: client.RequestOptions): Promise<GetPolicyTemplateOutput>

[src]

Retrieve the details for the specified policy template in the specified policy store.

getSchema(params: GetSchemaInput, opts?: client.RequestOptions): Promise<GetSchemaOutput>

[src]

Retrieve the details for the specified schema in the specified policy store.

isAuthorized(params: IsAuthorizedInput, opts?: client.RequestOptions): Promise<IsAuthorizedOutput>

[src]

Makes an authorization decision about a service request described in the parameters. The information in the parameters can also define additional context that Verified Permissions can include in the evaluation. The request is evaluated against all matching policies in the specified policy store. The result of the decision is either Allow or Deny, along with a list of the policies that resulted in the decision.

isAuthorizedWithToken(params: IsAuthorizedWithTokenInput, opts?: client.RequestOptions): Promise<IsAuthorizedWithTokenOutput>

[src]

Makes an authorization decision about a service request described in the parameters. The principal in this request comes from an external identity source in the form of an identity token formatted as a JSON web token (JWT). The information in the parameters can also define additional context that Verified Permissions can include in the evaluation. The request is evaluated against all matching policies in the specified policy store. The result of the decision is either Allow or Deny, along with a list of the policies that resulted in the decision.

At this time, Verified Permissions accepts tokens from only Amazon Cognito.

Verified Permissions validates each token that is specified in a request by checking its expiration date and its signature.

! IMPORTANT: ! Tokens from an identity source user continue to be usable until they expire. ! Token revocation and resource deletion have no effect on the validity of a token in your policy store

listIdentitySources(params: ListIdentitySourcesInput, opts?: client.RequestOptions): Promise<ListIdentitySourcesOutput>

[src]

Returns a paginated list of all of the identity sources defined in the specified policy store.

listPolicies(params: ListPoliciesInput, opts?: client.RequestOptions): Promise<ListPoliciesOutput>

[src]

Returns a paginated list of all policies stored in the specified policy store.

listPolicyStores(params?: ListPolicyStoresInput, opts?: client.RequestOptions): Promise<ListPolicyStoresOutput>

[src]

Returns a paginated list of all policy stores in the calling Amazon Web Services account.

listPolicyTemplates(params: ListPolicyTemplatesInput, opts?: client.RequestOptions): Promise<ListPolicyTemplatesOutput>

[src]

Returns a paginated list of all policy templates in the specified policy store.

putSchema(params: PutSchemaInput, opts?: client.RequestOptions): Promise<PutSchemaOutput>

[src]

Creates or updates the policy schema in the specified policy store. The schema is used to validate any Cedar policies and policy templates submitted to the policy store. Any changes to the schema validate only policies and templates submitted after the schema change. Existing policies and templates are not re-evaluated against the changed schema. If you later update a policy, then it is evaluated against the new schema at that time.

updateIdentitySource(params: UpdateIdentitySourceInput, opts?: client.RequestOptions): Promise<UpdateIdentitySourceOutput>

[src]

Updates the specified identity source to use a new identity provider (IdP), or to change the mapping of identities from the IdP to a different principal entity type.

updatePolicy(params: UpdatePolicyInput, opts?: client.RequestOptions): Promise<UpdatePolicyOutput>

[src]

Modifies a Cedar static policy in the specified policy store. You can change only certain elements of the UpdatePolicyDefinition parameter. You can directly update only static policies. To change a template-linked policy, you must update the template instead, using UpdatePolicyTemplate.

Note: - If policy validation is enabled in the policy store, then updating a static policy causes Verified Permissions to validate the policy against the schema in the policy store. If the updated static policy doesn't pass validation, the operation fails and the update isn't stored. - When you edit a static policy, you can change only certain elements of a static policy: - The action referenced by the policy. - A condition clause, such as when and unless. You can't change these elements of a static policy: - Changing a policy from a static policy to a template-linked policy. - Changing the effect of a static policy from permit or forbid. - The principal referenced by a static policy. - The resource referenced by a static policy. - To update a template-linked policy, you must update the template instead.

updatePolicyStore(params: UpdatePolicyStoreInput, opts?: client.RequestOptions): Promise<UpdatePolicyStoreOutput>

[src]

Modifies the validation setting for a policy store.

updatePolicyTemplate(params: UpdatePolicyTemplateInput, opts?: client.RequestOptions): Promise<UpdatePolicyTemplateOutput>

[src]

Updates the specified policy template. You can update only the description and the some elements of the policyBody.

! IMPORTANT: ! Changes you make to the policy template content are immediately (within the constraints of eventual consistency) reflected in authorization decisions that involve all template-linked policies instantiated from this template.

§Static Properties

ApiMetadata: client.ApiMetadata

[src]